Motorola RFS Series System Reference Manual Download

Page: 569 / 590

C-13

C.5.0.2 How to block the request from host on untrusted to host on trusted side based on packet

classification.

1. Add a new Classification Element with required Matching Criteria

2. Add a new Classification Group and assigned the newly created Classification Element. Set the action

required.

3. Add a new Policy Object. This should match the direction of the packet flow i.e. Inbound or Outbound.

4. Add the newly created PO to the active Network Policy.

5. Associate WLAN and Network Policy to the active Access Port Policy.

Any request matching the configured criteria should take the action configured in the Classification
Element.

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RFS Series

Reviews:

Related manuals for RFS Series

Brands by name

Popular brands

Motorola RFS Series, System Reference Manual

Search results

Summary of Contents for RFS Series

Reviews:

Related manuals for RFS Series

Brands by name

Popular brands