manualshive.com logo in svg

Motorola RFS Series, System Reference Manual

The Motorola RFS Series is a comprehensive line of professional-grade communication systems. To help you navigate its functionalities effortlessly, we offer a convenient System Reference Manual for download, completely free of charge. Access this invaluable resource at 88.208.23.73:8080 and unlock the full potential of your Motorola RFS Series device.

Share
Download
background image

   

D-7

 

directly or indirectly through you, then the only way you could satisfy both it and this License would be 
to refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the 
balance of the section is intended to apply and the section as a whole is intended to apply in other 
circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or 
to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the 
free software distribution system, which is implemented by public license practices. Many people have 
made generous contributions to the wide range of software distributed through that system in reliance 
on consistent application of that system; it is up to the author/donor to decide if he or she is willing to 
distribute software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this 
License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by 

copyrighted interfaces, the original copyright holder who places the Program under this License may add 
an explicit geographical distribution limitation excluding those countries, so that distribution is permitted 
only in or among countries not thus excluded. In such case, this License incorporates the limitation as if 
written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public License 

from time to time. Such new versions will be similar in spirit to the present version, but may differ in 
detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Program specifies a version number of this 
License which applies to it and "any later version", you have the option of following the terms and 
conditions either of that version or of any later version published by the Free Software Foundation. If the 
Program does not specify a version number of this License, you may choose any version ever published 
by the Free Software Foundation.

10.If you wish to incorporate parts of the Program into other free programs whose distribution conditions 

are different, write to the author to ask for permission. For software which is copyrighted by the Free 
Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. 
Our decision will be guided by the two goals of preserving the free status of all derivatives of our free 
software and of promoting the sharing and reuse of software generally.

                                                         NO WARRANTY

11.BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE 

PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN 
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" 
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED 
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD 
THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR 
OR CORRECTION.

12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY 

COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE 
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, 
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE 

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RFS Series

D-Link xStack User Manual preview
xStack
Brand: D-Link Pages: 357
CALIENT S320 Hardware User'S Manual preview
S320
Brand: CALIENT Pages: 46
CALIENT S320 Getting Started Manual preview
S320
Brand: CALIENT Pages: 42
i3 International S244 Quick Start Manual preview
S244
Brand: i3 International Pages: 2
Qlogic SANbox 5802V User Manual preview
SANbox 5802V
Brand: Qlogic Pages: 135
Qlogic SANbox2 SANbox2-64 User Manual preview
SANbox2 SANbox2-64
Brand: Qlogic Pages: 224
Lantech IPES-3408GSFP User Manual preview
IPES-3408GSFP
Brand: Lantech Pages: 119
Goobay MS-506PQ-N User Manual preview
MS-506PQ-N
Brand: Goobay Pages: 16
Top View KS-104OSD User Manual preview
KS-104OSD
Brand: Top View Pages: 13
TP-Link P1201-08 User Manual preview
P1201-08
Brand: TP-Link Pages: 34
Black Box KVS4-4004DHVX User Manual preview
KVS4-4004DHVX
Brand: Black Box Pages: 13
Taiden HCS-4310M User Manual preview
HCS-4310M
Brand: Taiden Pages: 4
Woxcon MMX3232-N User Manual preview
MMX3232-N
Brand: Woxcon Pages: 51
CityGrow Systems CG800 Series User Manual preview
CG800 Series
Brand: CityGrow Systems Pages: 21
Gefen EXT-UHD600-41 User Manual preview
EXT-UHD600-41
Brand: Gefen Pages: 136
jbc P105 Instruction Manual preview
P105
Brand: jbc Pages: 4
WaveSplitter WST-PIP001 Operation Manual preview
WST-PIP001
Brand: WaveSplitter Pages: 35
Jasco UltraPro 51410 Quick Start Manual preview
UltraPro 51410
Brand: Jasco Pages: 2

Brands by name

Popular brands

Load more brands