manualshive.com logo in svg

Motorola RFS Series, System Reference Manual

The Motorola RFS Series is a comprehensive line of professional-grade communication systems. To help you navigate its functionalities effortlessly, we offer a convenient System Reference Manual for download, completely free of charge. Access this invaluable resource at 88.208.23.73:8080 and unlock the full potential of your Motorola RFS Series device.

Share
Download
background image

D-8   

Motorola RF Switch System Reference Guide

 

THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED 
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO 
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED 
OF THE POSSIBILITY OF SUCH DAMAGES.

                                            END OF TERMS AND CONDITIONS

D.2.2 GNU Lesser General Public License 2.1

                                            GNU LESSER GENERAL PUBLIC LICENSE

                                                       Version 2.1, February 1999

Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-
1301 USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not 
allowed.

[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public 
License, version 2, hence the version number 2.1.]

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, 
the GNU General Public Licenses are intended to guarantee your freedom to share and change free 
software--to make sure the software is free for all its users.

This license, the Lesser General Public License, applies to some specially designated software packages--
typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it 
too, but we suggest you first think carefully about whether this license or the ordinary General Public License 
is the better strategy to use in any particular case, based on the explanations below.

When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses 
are designed to make sure that you have the freedom to distribute copies of free software (and charge for 
this service if you wish); that you receive source code or can get it if you want it; that you can change the 
software and use pieces of it in new free programs; and that you are informed that you can do these things.

To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask 
you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute 
copies of the library or if you modify it.

For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients 
all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you 
link other code with the library, you must provide complete object files to the recipients, so that they can 
relink them with the library after making changes to the library and recompiling it. And you must show them 
these terms so they know their rights.

We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, 
which gives you legal permission to copy, distribute and/or modify the library.

To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, 
if the library is modified by someone else and passed on, the recipients should know that what they have is 
not the original version, so that the original author's reputation will not be affected by problems that might 
be introduced by others.

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RFS Series

BABBITT LS8000 Owner'S Manual preview
LS8000
Brand: BABBITT Pages: 14
BABBITT LS6000 Owner'S Manual preview
LS6000
Brand: BABBITT Pages: 10
National Instruments SCXI-1175 Getting Started Manual preview
SCXI-1175
Brand: National Instruments Pages: 23
Aruba Instant On 1930 24G 4SFP/SFP+l Installation And Getting Started Manual preview
Instant On 1930 24G 4SFP/SFP+l
Brand: Aruba Pages: 48
Ubiquiti EdgeSwitch 10 XP Quick Start Manual preview
EdgeSwitch 10 XP
Brand: Ubiquiti Pages: 13
LEGRAND Raritan Dominion LX II Quick Setup Manual preview
Raritan Dominion LX II
Brand: LEGRAND Pages: 7
TAXON TOOLS Scart Switch Manual preview
Scart Switch
Brand: TAXON TOOLS Pages: 9
PABX 208AC Instruction Manual preview
208AC
Brand: PABX Pages: 46
Global Streams GlobeCaster STUDIO 4000 Manual preview
GlobeCaster STUDIO 4000
Brand: Global Streams Pages: 144
MRD TNM4000-TP36FF4X16G24P User Manual preview
TNM4000-TP36FF4X16G24P
Brand: MRD Pages: 38
Phonic MIDI HUB User Manual preview
MIDI HUB
Brand: Phonic Pages: 16
Unipoe PM5003GSN User Manual preview
PM5003GSN
Brand: Unipoe Pages: 9
Cabletron Systems ELS10-26TX User Manual preview
ELS10-26TX
Brand: Cabletron Systems Pages: 116
UNICOM Smart-Switch/801 FEP-30109T-C User Manual preview
Smart-Switch/801 FEP-30109T-C
Brand: UNICOM Pages: 22
DataParts DAP-SW1001 User Manual preview
DAP-SW1001
Brand: DataParts Pages: 5
Edge-Core ES4324 Installation Manual preview
ES4324
Brand: Edge-Core Pages: 60
steute Ex 13 Mounting And Wiring Instructions preview
Ex 13
Brand: steute Pages: 10
Kathrein EXE 1512 Manual preview
EXE 1512
Brand: Kathrein Pages: 41

Brands by name

Popular brands

Load more brands