8
RS409 Ring Scanner
5.
Insert your index finger through the finger strap. Tighten the strap and press
the hook and pile together.
6.
If required, cut excess finger strap material.
Replacing the Trigger Assembly
To replace the trigger assembly:
1.
Remove the finger strap assembly.
2.
Turn the RS409 upside-down.
3.
Remove the set screw with screwdriver.
4.
Turn the trigger assembly counter-clockwise until the exit window and scan
trigger align.
5.
Lift the trigger assembly off the scan assembly.
6.
Align replacement trigger assembly with scan assembly.
7.
Rotate trigger assembly 1/4 turn clockwise.
8.
Tighten the set screw with screwdriver.
9.
Replace finger strap assembly.
