UNCONTROLLED DOCUMENT
RSGu3500 Residential Seamless Mobility Gateway User Guide
8
Overview Installation Troubleshooting
Specifications Glossary License
Basic Advanced TCP/IP Wireless
DSL Modem Users
If you cannot connect to the voice gateway, and your modem was turned off for at least 10 minutes, you may need
to set the PPPoE configurations.
1
Open a web browser from a computer connected to one of the RSGu3500 Ethernet ports.
2
Type
http://192.168.15.1
in the address field and press
ENTER
to access the sign in window.
3
Type
router
in the Username and Password fields (the default is
router
for both fields).
4
Click on
SETUP
(located on the top menu bar), and then click on
WAN Configuration
(located on menu bar
at the left side of the screen).
5
Select
PPPoE
from the Type drop down menu.
6
Type the Username and Password you normally use to log into your DSL service.
7
In the
Keep Alive
field, type 0 to ensure that your DSL link is always active.
8
Click
Connect t
o start your Internet connection.
9
Click Save. Open a web browser and enter a web address (try www.motorola.com). If you can access the
site, you have successfully installed your voice gateway.