UNCONTROLLED DOCUMENT
RSGu3500 Residential Seamless Mobility Gateway User Guide
95
Overview Installation Troubleshooting
Specifications Glossary License
Basic Advanced TCP/IP Wireless
Setting Up Your Wireless LAN (WLAN)
1
Click the
Wireless
tab to access the features (Setup, Advanced, Security, Access List, WDS, Restart
Wireless).
2
Click the
Enable Wireless
box.
3
Enter the
Primary SSID
information.
4
Select the
Channel B/G
(1 through 11) from the pull down menu.
5
Select the
802.11 Mode
(Mixed, B only B+, G only, G+)
Set the transmission protocol for your WLAN:
Mixed
—
802.11b/g
B only
—
802.11b only
B+
—
802.11b+
G only
—
802.11g
6
Click
Save
. You must use the
Restart Wireless
feature in order for your changes to take affect.
Caution!
To prevent unauthorized eavesdropping or access to WLAN data, you must enable wireless security. The
default
RSGu3500
settings provide no wireless security. After your WLAN is operational, be sure to enable
wireless security.
Connect at least one computer to the
RSGu3500
Ethernet port to perform
configuration. Do not attempt to configure the
RSGu3500
over a wireless connection.