UNCONTROLLED DOCUMENT
Overview Installation Troubleshooting
Specifications Glossary License
Basic Advanced TCP/IP Wireless
RSGu3500 Residential Seamless Mobility Gateway User Guide
4
Installation
Before You Begin
Before you begin installation, check that you received the following items with your RSGu3500:
Note:
The Ethernet cables and telephone cord provided are standard and color coordinated to help with
installation. You can use substitute with other standard cables and cords to meet your needs.
In addition to your RSGu3500 residential gateway, you also need:
•
An established DSL or cable Internet connection
•
One or two touch-tone telephones
•
Your computer must meet the minimum requirements listed below:
—
Pentium-class processor or faster
—
16 MB of memory
—
10 MB of hard disk space available
—
Windows
®
2000, Windows XP
™
Gather Information
You may need to obtain the following information about your high-speed Internet connection:
•
For a DSL connection
only
, your user name and password
•
For a cable modem connection using
only
, your
,
,
server IP address or addresses
•
If you already have a router, we recommend printing its configuration screens to use for reference during
.
Item
Description
AC adapter
Connects the RSGu3500 to an AC electrical outlet (the plug shown is for the United
States or Canada; yours may look different)
Ethernet cables
Blue cable connects the
Internet
port on your RSGu3500 to your cable or DSL
modem
Yellow cable connects the
Ethernet
port on your RSGu3500 to a computer or other
network device
Vertical mounting stand
Provides vertical mounting on a desktop or other flat surface to use less space
RSGu3500 Quick Start Guide
Provides instructions to quickly set up and configure your residential gateway
Telephone Jack
Adapter
(UK only)
Converts a British BT431 telephone cord to RJ-11 to connect to the residential
gateway