UNCONTROLLED DOCUMENT
RSGu3500 Residential Seamless Mobility Gateway User Guide
9
Overview Installation Troubleshooting
Specifications Glossary License
Basic Advanced TCP/IP Wireless
Installation - Wireless Connection
To connect to the voice gateway wirelessly, your computer must have a 802.11b or 802.11g wireless adapter
installed. If all wireless security and encryption are disabled on the adapter and the RSGu3500, the computer will
automatically connect to the voice gateway.
Note:
Motorola ships the RSGu3500 with all wireless security functions disabled.
Connect at least one computer to the voice gateway using a wired connection in order to perform the
configuration. Do not attempt to configure the RSGu3500 over a wireless connection. After your wireless LAN is
operational, enable security.
B
Cable or DSL
Modem
Computer to
configure the
RSGu3500
RSGu3500
To AC power