Overview
Installation
Troubleshooting
Contact
FAQ
Specifications Glossary
License
Configuration:
Basic Gateway TCP/IP Wireless USB
SBG940 User Guide
22
Wall Mounting
If you mount the unit on the wall, you must:
•
Locate the unit as specified by the local or national codes governing residential or business cable TV and
communications services.
•
Follow all local standards for installing a network interface unit/network interface device (NIU/NID).
If possible, mount the unit to concrete, masonry, a wooden stud, or other very solid wall material. Use anchors if
necessary; for example, if you must mount the unit on drywall.
To mount your SBG940 on the wall:
1
Print the
Wall Mounting Template
on page 24.
Go to
page 24
and click the
icon or choose
from the
File
menu to display the Print dialog box.
(The following image is from Adobe Acrobat Reader
®
version 4.0 running on Windows 2000; there may be
slight differences in your version.)
Be sure you print the template at 100% scale. Be sure Fit to page is not selected.
To print the template
only
, select
Current page
as the Print Range.
Click the
OK
button to print the template.
2
Measure the printed template with a ruler to ensure that it is the correct size.
3
Use a center punch to mark the center of the holes.
4
On the wall, locate the marks for the mounting holes.
5
Drill the holes to a depth of at least 1
1
/
2
inches (3.8 cm).
Caution!
Before drilling holes, check the structure for potential damage to water, gas, or electric lines.
Be sure this is
not selected.
Select this to print
page 24 only.