Quick Installation Guide 5
A. Connect the SBG940 to Your Cable TV System
To activate your high-speed Internet service, you need to call your cable
provider. Your cable provider requires the MAC address labeled
CM HFC MAC ID
on the
bottom of the SBG940. For reference, you can write
your CM HFC MAC ID here:
00 : ______ : ______ : ______ : ______ : ______
Connecting Directly to the Cable Outlet
Connect one end of the
coaxial cable
to the cable TV wall outlet and connect
the other end to the cable connector on the SBG940.
Connect one end of the
AC power cord
into the power connector on the
SBG940 and plug the other end into an AC wall outlet, surge protector,
or UPS. This turns the SBG940 on.
If, after a few minutes, the power, DS, US, and ONLINE lights on the front
panel light solid green, continue with Section B, C, or D. Otherwise,
contact your cable provider and provide your MAC address.
