116
SBG1000 User Guide
Home
X
Exit
Overview Installation Troubleshooting Contact
FAQ Specifications Glossary License
Configuration:
Basic Gateway TCP/IP Wireless Print Server USB
Setting Up a USB Driver in Windows Me
1
Insert the SBG1000 Installation CD-ROM in the CD-ROM drive.
This CD contains the USB drivers and must
be inserted and read by the PC
before you connect the SBG1000 to the PC.
2
Connect the USB cable as shown in
USB Connection
.
A few seconds after you complete the USB connection, the Add New Hardware Wizard window is displayed:
3
Click
Next
. Windows automatically searches for the correct USB drivers and installs them. If the installation is
successful, the following window is displayed:
4
If the window above is displayed, click
Finish
. Otherwise, be sure the
SBG1000 Installation
CD-ROM is
correctly inserted in the CD-ROM drive.
When you finish setting up the USB driver, you can continue with “
Configuring TCP/IP
”.
Although your SBG1000 model number may be different than in the images in this guide, the
procedure is the same.