35
SBG1000 User Guide
Home
X
Exit
Overview Installation Troubleshooting Contact
FAQ Specifications Glossary License
Configuration:
Basic Gateway TCP/IP Wireless Print Server USB
Enabling Remote Access
If you enable remote access, your SBG1000 can be configured from any computer connected to the Internet.
To enable remote access to the SBG1000 over the Internet:
1
On the SBG1000 Setup Program, click
Admin
to display the ADMIN — basic page.
2
Click
advanced
to display the ADMIN — advanced page.
3
Click the box next to
Enable remote access
.
4
Click
Apply
to apply your change.
Configuring the SBG1000 From a Remote Computer
To run the SBG1000 Setup Program from a remote computer over the Internet:
1
Open a web browser.
2
In the Address or Location field, type the SBG1000
public IP address
and press
ENTER
to display the Login
window. The
public IP address
is assigned by your cable provider.
3
Complete the rest of the log-in procedure (steps 3 to 5 in “
Starting the SBG1000 Setup Program
”).
4
Configure the SBG1000 in the same manner as from a computer on its private LAN.
