8
Basic Setup
3. Basic Setup
3.1
Charging the Pet Camera
1.
Connect the power adapter to an electrical outlet and insert the plug into
the micro USB socket on the Pet Camera. Only use the supplied power
adapter (5V DC / 1000mA) with the Micro USB plug.
2.
The status indicator LED lights up solid red, which indicates that it is
charging.
Note
Only use the enclosed power adapter (5V DC / 1000mA).
The average battery life is approximately 2 weeks, depending on usage. The
Pet Camera will emit beep tones when the battery is low. To conserve battery
life, press and hold the
POWER KEY
to switch off the Pet Camera when it is
not in use.
3.2
Attaching the Adjustable Strap to the Pet Camera
1.
Set the Pet Camera facing down.
2.
With the front side of the buckle facing down, thread the strap through
the first slot, moving it towards the second slot.
3.
Continue to thread through the second slot.
It takes about 6 hours to fully
charge the battery pack
prior to initial use.
Slot
Slot