12
SE-1010 / SE-2000 Encoder Product Manual, Version 1.0
Preset Menu
The SE encoder has 30 presets. To review the factory-defined presets, see Table 1 on page 9.
Use the Preset menu to select the desired preset configuration.
To access the Preset menu and view options
1.
Navigate to the Preset menu as shown below:
2.
Press the right arrow ( > ) button to access the submenu: Name, Video, Audio1, Audio2,
VBI, PID, or PGM.
Name Parameter
To change the name of a preset
1.
To access the Name parameter in the Preset menu, press the right arrow ( > ) button until
the pointer is in front of the name and press ENTER.
2.
Press the right and left arrow buttons to move the pointer to the name.
3.
For each character in the name:
•
Use the up and down arrow buttons to enter another letter or number.
•
Use the right arrow button to move the cursor to the next character.
•
Use the left arrow button to move the cursor backward.
Note:
Names can be up to 28 characters.
To insert a space, choose the underscore character ( _ ).
4.
After changing the name, press the ENTER button.
•
P r e s e t > N a m e V i d e o A u d i o 1 A u d i o 2
< > 1
P r e s e t 1
•
> P r e s e t N a m e V i d e o A u d i o 1 A u d i o 2
< > 1
P r e s e t 1