Get Your Device Ready
Insert the Battery
1.
With your thumbs, press down on the battery
cover on the back of your device and slide the
cover down to remove it.
2.
Align the battery’s contacts with those inside
the battery compartment and gently press
down until the battery is seated.
3.
Slide the orange battery lock latch down to
secure the battery.
Battery Lock Latch
4.
Replace the back cover.
Charge the Battery
1.
Insert the larger end of the USB cable into the
charging head.
2.
Connect the smaller end of the USB cable to the
micro USB port on the left side of your device.
3.
Plug the charging head into a power outlet.
Turn the Device On
• Press the Power button on top of the device.
Tip:
The first time you turn the device on, you will see a
splash screen followed by a calibration window. Remove
the stylus from the back of the device and follow the
onscreen instructions to calibrate your touchscreen.
Turning the Device Off
1.
Press and hold the Power button for at least
five seconds until you see the power options
screen.
2.
Tap
Power Off
.