Quick Installation Guide
11
D. Wireless Network Setup
Computers using the wireless connection require a compatible wireless adapter
installed. The adapter type depends on whether the computer has a USB port,
PCI slot, or credit-card-sized PCMCIA slot.
To provide an initial wireless connection to your network and the Internet:
1
Connect the SBG900 to the cable TV system as described in Section A.
2
On each wireless client computer, install the wireless adapter hardware and
driver software according to the manufacturer's instructions.
3
On each wireless client computer, set up a wireless adapter profile to
“connect” the client to the SBG900. The procedure depends on your
wireless adapter and computer operating system.
In your initial profile, use the SBG900 default wireless Network Name
(ESSID)
motorola
(case-sensitive).
Your computers are connected but not secure.
The default SBG900 settings provide no wireless security.
After
your wireless LAN is operational, be sure to enable security as
described in “Setting Up the Wireless LAN” in the
SBG900
User Guide
.
