12 - 34 Symbol LS3008 Product Reference Guide
Interleaved 2 of 5 (ITF)
Enable/Disable Interleaved 2 of 5
To enable or disable Interleaved 2 of 5, scan the appropriate bar code below, and select an Interleaved 2 of 5
length from the following pages.
Set Lengths for Interleaved 2 of 5
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for I 2 of 5 to any length, one or two discrete lengths, or lengths within a specific
range.
•
One Discrete Length
- Select this option to decode only I 2 of 5 symbols containing a selected length. Select
the length using the numeric bar codes in
. For example, to decode only I 2
of 5 symbols with 14 characters, scan
I 2 of 5 - One Discrete Length
, then scan
1
followed by
4
. To correct
an error or to change the selection, scan
Cancel
on
•
Two Discrete Lengths
- Select this option to decode only I 2 of 5 symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in
. For
example, to decode only those I 2 of 5 symbols containing either 2 or 14 characters, select
I 2 of 5 - Two
Discrete Lengths
, then scan
0
,
2
,
1
, and then
4
. To correct an error or to change the selection, scan
Cancel
on
.
•
Length Within Range
- Select this option to decode an I 2 of 5 symbol with a specific length range.
Select lengths using numeric bar codes in
For example, to decode I 2 of
5 symbols containing between 4 and 12 characters, first scan
I 2 of 5 - Length Within Range
. Then scan
0
,
4
,
1,
and
2
(single digit numbers must always be preceded by a leading zero). To correct an error or change
the selection, scan
Cancel
•
Any Length
- Scan this option to decode I 2 of 5 symbols containing any number of characters within the
scanner capability.
*
Enable Interleaved 2 of 5
Disable Interleaved 2 of 5
NOTE
Due to the construction of the I 2 of 5 symbology, it is possible for a scan line covering only a
portion of the code to be interpreted as a complete scan, yielding less data than is encoded in
the bar code. To prevent this, select specific lengths (
I 2 of 5 - One Discrete Length - Two
Discrete Lengths
) for I 2 of 5 applications
.
Summary of Contents for Symbol LS3008
