This feature allows you to refer to or redial any of the
last ten phone numbers to which calls were placed.
The numbers are stored in the order placed and
always represent the ten most recent calls.
Successive calls to the same number are stored only
once, and all are retained when the unit is shut off.
NOTE
When scrolling, you may observe that a
location number is skipped. This may be caused
by pressing Í when the display is empty and
does not mean that a number has been lost.
1. Recall two-digit location number where an
area code and prefix is stored.
2. Add additional digits as needed.
3. Press
Í
.
You can add additional digits to the end of recalled
numbers by entering them before pressing Í.
This is particularly useful if you often place calls to
the same area code and prefix, e.g., an office, but
need to reach different extensions with each call.
Press and hold for one second any one of
the digit buttons
¤
through
·
.
The digit buttons ¤ through · (⁄ is reserved
for Emergency Dialing) provide an advanced form
of Super Speed Dialing. Once numbers have been
stored in memory location 2-9, calls can be placed
from these locations by pressing the associated
Turbo Dial
Recalling an Area Code and Prefix
(Postscripting)
Memory
34
