To place a call using your credit card:
1. Recall and send the credit card memory
location. You can do this in the following
ways:
a. If the credit card number is stored in a
One Touch Dial location, simply press and
hold the appropriate One Touch Dial key for
one second.
b. If the credit card number is stored in a
Turbo Dial location (1-9), simply press and
hold the appropriate key for one second.
2. The display will flash
Enter Number
. This is
the prompt to enter the phone number you
wish to call.
3. Enter the phone number you wish to call or
recall it from memory. Note that the area code
must be included. You may enter and send
the phone number in the following ways:
a. Enter the number manually. The number
must be three or more digits. Press
Í
to
initiate the call.
b. Enter the Turbo Dial location where the
number is stored. You do not need to press
Í
to initiate the call.
c. Enter
‰
and the two-digit memory
location. Press
Í
to initiate the call.
4. The call is now initiated. The first group of
numbers will be transmitted (i.e., the access
number or number you are calling). After
waiting for the system response, press the
One Touch Dial key to send the second
group of numbers (i.e., the number you are
calling or the credit card PIN number). If a
third group is required for your credit card,
Memory
43
