84
Setup
(
4)
To enter the sub-menu, press
– 4 Setup – Ok
.
This sub-menu allows you to change your
MTM800 configuration: key tones,
language, ring style, time, date or data setup.
Setting the Ring Style (
4 1)
This option allows you to set the incoming call ring style. Your
MTM800 features nine selectable ring styles for Duplex and
Simplex calls:
1.
Press
– 4 Setup – 1 Ring Style – 1 Duplex or
2 Simplex – Ok
.
2.
Scroll to the desired style, and press
Set
.
The display shows your new selection.
You will hear the new ring style
immediately for a few seconds. If
necessary, turn the Volume knob to adjust the volume.
Setting the Display’s Working Language (
4 2)
Once in the Setup menu, select
2 Language
.
The display shows the current language
used. You can customize your MTM800 to
operate in English, Simplified Chinese,
Traditional Chinese, or in a language defined by your Service
Provider. The default setting from factory is English.
Scroll to the desired language and press
Set.
The display
shows the selected language for a few seconds.
Setting Up Data Mode (
4 3)
You can connect the MTM800 to an external device (such as
a laptop or desktop PC). The MTM800 will then be capable of
transmitting and receiving data from the external device. The
Menu
1 Ring Style
Back
Ok
2 Language
3 Data Setup
Menu
Menu
Menu
2 Style 2
Back
1 British
3 Style 3
Set
Menu
2 Deutsch
1 English
Back Set
6 <User Defined>
Menu
menu.fm Page 84 Thursday, November 13, 2008 8:49 AM
