Chapter 17
Emergency Operations
There are two ways in declaring or canceling an Emergency.
You can declare or cancel an Emergency locally by pressing the programmable button (Emergency
button) or the Emergency button on your Bluetooth accessory.
You can also declare or cancel an Emergency remotely by an authorized user through WAVE APP or a
dispatcher.
When Emergency is declared and radio enters into Emergency mode successfully, the display flashes
with the Emergency icon. When the display flashes the Emergency icon, you are only allowed to view
the battery status, volume control, make an emergency call and exit the emergency mode.
During the Emergency mode, any call launched is declared as Emergency Call.
Declaring Emergency
Procedure:
Press and hold the
Emergency
button.
The display shows a countdown from
3
,
2
, and
1
with increasing tone.
If Emergency is declared by mistake, during the countdown, release the
Emergency
button to cancel
declaring Emergency.
If Emergency is declared successfully, your radio shows the following indications:
• The Emergency tone sounds.
• The amber LED illuminates.
• The display shows Emergency icon.
If Emergency is failed to declare, your radio returns to the previously selected channel.
Cancelling Emergency
Procedure:
Press and hold the
Emergency
button.
The display shows a countdown from
3
,
2
, and
1
with increasing tone.
If Emergency is declared by mistake, during the countdown, release the
Emergency
button to cancel
declaring Emergency.
If Emergency is cancelled successfully, the display returns to previously selected channel.
Receiving Emergency Alerts
When you receive a Declared-Emergency Alert, your radio shows the following indications:
• The Emergency tone sounds.
• The amber LED blinks for 2 seconds.
MN006371A01-AA
Chapter 17: Emergency Operations
28
