background image

ii 

VIP2502W Wireless IPTV Receiver Installation Guide

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

Graphical symbols and supplemental warning markings are located on the back and bottom 

of the terminal.

WARNING

TO REDUCE THE RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN 

OR MOISTURE.

The lightning flash with arrowhead symbol within an equilateral triangle 

is intended to alert the user to the presence of uninsulated dangerous 

voltage within the product’s enclosure that may be of sufficient 

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert 

the user to the presence of important operating and maintenance 

(servicing) instructions in the literature accompanying the appliance.

Product identification and supply rating are provided on the label found 

on the bottom of the unit.

IMPORTANT SAFETY INSTRUCTIONS

• 

Read these instructions.

• 

Keep these instructions.

• 

Heed all warnings.

• 

Follow all instructions.

• 

Do not use this apparatus near water.

• 

Clean only with a dry cloth.

• 

Do not block any ventilation openings. Install according to the manufacturer’s 
instructions.

• 

Do not install near any heat sources, such as radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce heat.

• 

Protect the power cord from being walked on or pinched, particularly at plugs, 
convenience receptacles, and the point where they exit from the apparatus.

• 

Only use attachments/accessories specified by the manufacturer.

• 

Unplug this apparatus during lightning storms or when unused for long periods of 
time.

• 

Refer all servicing to qualified service personnel. Servicing is required when the 
apparatus has been damaged in any way, such as the power supply cord or plug 
is damaged, liquid has been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not operate normally, or has 
been dropped.

Summary of Contents for VIP2502W





















Reviews: