1-10
Computer Group Literature Center Web Site
Hardware Preparation and Installation
1
). The ESD strap must be secured to your wrist and to ground
throughout the procedure.
2. Perform an operating system shutdown. Turn the AC or DC power off
and remove the AC cord or DC power lines from the system. Remove
chassis or system cover(s) as necessary for access to the motherboard.
!
Caution
Caution
Inserting or removing modules with power applied may result in
damage to module components.
!
Warning
Warning
Dangerous voltages, capable of causing death, are present in this
equipment. Use extreme caution when handling, testing, and adjusting
!
Caution
Caution
Avoid touching areas of integrated circuitry; static discharge can
damage these circuits.
3. Remove the PCI filler from the chassis.