Replacing Lithium Batteries
http://www.motorola.com/computer/literature
1-15
1
❏
Do not charge.
❏
Always check proper polarity.
!
Caution
Caution
Danger of explosion if battery is replaced incorrectly.
Replace battery only with the same or equivalent type recommended by
the equipment manufacturer. Dispose of used batteries according to local
regulations and manufacturer’s instructions.
Caution
Caution
Avoid touching areas of integrated circuitry; static discharge can damage
circuits.
Use ESD
Wrist Strap
ESD
Attach an ESD strap to your wrist. Attach the other end of the ESD strap
to an electrical ground. (Note that the system chassis may not be grounded
if it is unplugged.) The ESD strap must be secured to your wrist and to
ground throughout the procedure.
1. To remove the battery from the module, carefully pull the battery from
the socket.
2. Before installing a new battery, ensure that the battery pins are clean.
3. Note the battery polarity and press the new battery into the socket.
Note
When the battery is in the socket, no soldering is required.
4. Recycle or dispose of the old battery according to local regulations and
manufacturer’s instructions.