manualshive.com logo in svg

Motorola WiNG 5.6, Reference Manual

The Motorola WiNG 5.6 Reference Manual is a comprehensive guide for users of this cutting-edge product. It provides detailed instructions and troubleshooting tips, ensuring seamless operation. You can easily download this invaluable manual for free from our website 88.208.23.73:8080, unlocking the full potential of your Motorola WiNG 5.6 experience.

Share
Download
background image

Publicly Available Software B - 25

The precise terms and conditions for copying, distribution and modification follow.  Pay close attention to the difference 
between a "work based on the library" and a "work that uses the library".  The former contains code derived from the library, 
whereas the latter must be combined with the library in order to run.

 GNU LESSER GENERAL PUBLIC LICENSE

   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder 
or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this 
License"). Each licensee is addressed as "you".

A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application 
programs (which use some of those functions and data) to form executables.

The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based 
on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library 
or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, 
translation is included without limitation in the term "modification".)

"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source 
code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used 
to control compilation and installation of the library.

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act 
of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute 
a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what 
the Library does and what the program that uses the Library does.

1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, 

provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of 
warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of 
this License along with the Library.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in 
exchange for a fee.

2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy 

and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these 
conditions:

a. The modified work must itself be a software library.

b. You must cause the files modified to carry prominent notices stating that you changed the files and the date of any 

change.

c. You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.

d. If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that 

uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort 
to ensure that, in the event an application does not supply such function or table, the facility still operates, and 
performs whatever part of its purpose remains meaningful.

(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent 
of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this 
function must be optional: if the application does not supply it, the square root function must still compute square 
roots.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the 
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, 
do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as 

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.6

D-Link DIR-868L Manual preview
DIR-868L
Brand: D-Link Pages: 59
D-Link COVR-C1200 Manual preview
COVR-C1200
Brand: D-Link Pages: 24
Zks ZKS-T23 Hardware Manual preview
ZKS-T23
Brand: Zks Pages: 20
Planet WNAP-3000PE Quick Installation Manual preview
WNAP-3000PE
Brand: Planet Pages: 8
Ebyte E76-433M20S User Manual preview
E76-433M20S
Brand: Ebyte Pages: 10
E-TOP BR182n User Manual preview
BR182n
Brand: E-TOP Pages: 93
Billion BiPAC 8800AXL User Manual preview
BiPAC 8800AXL
Brand: Billion Pages: 230
Cisco uBR905 Installation Manual preview
uBR905
Brand: Cisco Pages: 90
Linksys WAP11 - Instant Wireless Network Access Point User Manual preview
WAP11 - Instant Wireless Network Access Point
Brand: Linksys Pages: 33
EnGenius ENH1350EXT User Manual preview
ENH1350EXT
Brand: EnGenius Pages: 80
EnGenius ENH500v3 User Manual preview
ENH500v3
Brand: EnGenius Pages: 85
EnGenius ECB150 Manual preview
ECB150
Brand: EnGenius Pages: 113
Luxul XAP-1210 Quick Install Manual preview
XAP-1210
Brand: Luxul Pages: 12
Viega ManaBloc Product Instructions preview
ManaBloc
Brand: Viega Pages: 2
DragonWave AirPair 100-UL Product Manual preview
AirPair 100-UL
Brand: DragonWave Pages: 130
3Com 9552 - AP Dual Radio PoE Access Point Datasheet preview
9552 - AP Dual Radio PoE Access Point
Brand: 3Com Pages: 8
3Com 3CRWX275075A - Wireless LAN Managed Access Point 2750 Quick Start Manual preview
3CRWX275075A - Wireless LAN Managed Access Point 2750
Brand: 3Com Pages: 16
Zinwell ZW-2000-IA User Manual preview
ZW-2000-IA
Brand: Zinwell Pages: 20

Brands by name

Popular brands

Load more brands