manualshive.com logo in svg

Motorola WiNG 5.6, Reference Manual

The Motorola WiNG 5.6 Reference Manual is a comprehensive guide for users of this cutting-edge product. It provides detailed instructions and troubleshooting tips, ensuring seamless operation. You can easily download this invaluable manual for free from our website 88.208.23.73:8080, unlocking the full potential of your Motorola WiNG 5.6 experience.

Share
Download
background image

Publicly Available Software B - 33

    modified object code on the User Product (for example, the work has been installed in ROM).

      The requirement to provide Installation Information does not include a requirement to continue to provide support service, 
warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been 
modified or installed.  Access to a network may be denied when the modification itself materially and adversely affects the 
operation of the network or violates the rules andprotocols for communication across the network.

      Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that 
is publicly documented (and with an implementation available to the public in source code form), and must require no special 
password or key for unpacking, reading or copying.

      7. Additional Terms.

      "Additional permissions" are terms that supplement the terms of this License by making exceptions from one or more of its 
conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in 
this License, to the extent that they are valid under applicable law.  If additional permissions apply only to part of the Program, 
that part may be used separately under those permissions, but the entire Program remains governed by this License without 
regard to the additional permissions.

      When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or 
from any part of it.  (Additional permissions may be written to require their own removal in certain cases when you modify the 
work.)  You may place additional permissions on material, added by you to a covered work, for which you have or can give 
appropriate copyright permission.

      Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the 
copyright holders of that material) supplement the terms of this License with terms:

        a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or

        b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate 
Legal Notices displayed by works containing it; or

        c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked 
in reasonable ways as different from the original version; or

        d) Limiting the use for publicity purposes of names of licensors or authors of the material; or

        e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or

        f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified 
versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions 
directly impose on those licensors and authors.

      All other non-permissive additional terms are considered "further restrictions" within the meaning of section 10.  If the 
Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that 
is a further restriction, you may remove that term.  If a license document contains a further restriction but permits relicensing 
or conveying under this License, you may add to a covered work material governed by the terms of that license document, 
provided that the further restriction does not survive such relicensing or conveying.

      If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of 
the additional terms that apply to those files, or a notice indicating where to find the applicable terms.

      Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as 
exceptions; the above requirements apply either way.

      8. Termination.

      You may not propagate or modify a covered work except as expressly provided under this License.  Any attempt otherwise 
to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses 
granted under the third paragraph of section 11).

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.6

Microsemi PD-9501G/24AC User Manual preview
PD-9501G/24AC
Brand: Microsemi Pages: 2
TRENDnet TEW-311BRP User Manual preview
TEW-311BRP
Brand: TRENDnet Pages: 127
Aruba AP-100 Series Installation Manual preview
AP-100 Series
Brand: Aruba Pages: 2
Ebyte E220-900MM22S Manual preview
E220-900MM22S
Brand: Ebyte Pages: 14
Lenovo TginkPad EM160R-GL Regulatory Notice preview
TginkPad EM160R-GL
Brand: Lenovo Pages: 33
Innoband 4000-R1 User Manual preview
4000-R1
Brand: Innoband Pages: 83
AU Speed Wi-Fi NEXT W03 Notes On Usage preview
Speed Wi-Fi NEXT W03
Brand: AU Pages: 2
EnGenius ECB600 Quick Installation Manual preview
ECB600
Brand: EnGenius Pages: 2
Quectel LC29D User Manual preview
LC29D
Brand: Quectel Pages: 43
Ebyte E18-TBH-27 User Manual preview
E18-TBH-27
Brand: Ebyte Pages: 5
Ebyte E103-W06-TB User Manual preview
E103-W06-TB
Brand: Ebyte Pages: 5
Ebyte E01-2G4M27SX User Manual preview
E01-2G4M27SX
Brand: Ebyte Pages: 12
Ebyte E10 Series User Manual preview
E10 Series
Brand: Ebyte Pages: 14
SIRETTA QUARTZ-LITE Series Software Manual preview
QUARTZ-LITE Series
Brand: SIRETTA Pages: 46
Air Live N.TOP User Manual preview
N.TOP
Brand: Air Live Pages: 75
MasterCraft 054-2438-0 Instruction Manual preview
054-2438-0
Brand: MasterCraft Pages: 16
VideoComm Technologies EWC-002 Owner'S Manual preview
EWC-002
Brand: VideoComm Technologies Pages: 10
3Com 9552 - AP Dual Radio PoE Access Point Datasheet preview
9552 - AP Dual Radio PoE Access Point
Brand: 3Com Pages: 8

Brands by name

Popular brands

Load more brands