manualshive.com logo in svg

Motorola WiNG 5.6, Reference Manual

The Motorola WiNG 5.6 Reference Manual is a comprehensive guide for users of this cutting-edge product. It provides detailed instructions and troubleshooting tips, ensuring seamless operation. You can easily download this invaluable manual for free from our website 88.208.23.73:8080, unlocking the full potential of your Motorola WiNG 5.6 experience.

Share
Download
background image

B - 40 WiNG 5.6 Access Point System Reference Guide 

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act 
of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute 
a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what 
the Library does and what the program that uses the Library does.

1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, 

provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of 
warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other 
recipients of the Program a copy of this License along with the 

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in 
exchange for a fee.

2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy 

and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these 
conditions:

a. The modified work must itself be a software library.

b. You must cause the files modified to carry prominent notices stating that you changed the files and the date of any 

change.

c. You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.

d. IIf a facility in the modified Library refers to a function or a table of data to be supplied by an application program that 

uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort 
to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs 
whatever part of its purpose remains meaningful.

(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent 
of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this 
function must be optional: if the application does not supply it, the square root function must still compute square 
roots.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the 
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, 
do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as 
part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, 
whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote 
it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent 
is to exercise the right to control the distribution of derivative or collective works based on the Library.

In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) 
on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the 

Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General 
Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public 
License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.

Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies 
to all subsequent copies and derivative works made from that copy.

This option is useful when you wish to copy part of the code of the Library into a program that is not a library.

4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form 

under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding 

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.6

Global Telecom MiFi 8000 Reference Manual preview
MiFi 8000
Brand: Global Telecom Pages: 5
ADTRAN NetVanta 150 Series Hardware Installation Manual preview
NetVanta 150 Series
Brand: ADTRAN Pages: 28
DIGITAL YACHT iNavConnect Installation And Instruction Manual preview
iNavConnect
Brand: DIGITAL YACHT Pages: 6
Loopcomm LP-9318A User Manual preview
LP-9318A
Brand: Loopcomm Pages: 36
Bountiful BWRG500 Quick Start Manual preview
BWRG500
Brand: Bountiful Pages: 1
Comet Labs nr WRP64 User Manual preview
nr WRP64
Brand: Comet Labs Pages: 46
EnGenius EOA7535 User Manual preview
EOA7535
Brand: EnGenius Pages: 45
EnGenius EOC-2610 User Manual preview
EOC-2610
Brand: EnGenius Pages: 60
EnGenius ENH1750EXT User Manual preview
ENH1750EXT
Brand: EnGenius Pages: 75
EnGenius ENS500 User Manual preview
ENS500
Brand: EnGenius Pages: 84
EnGenius ENS202 User Manual preview
ENS202
Brand: EnGenius Pages: 86
EnGenius ENS500EXT User Manual preview
ENS500EXT
Brand: EnGenius Pages: 88
EnGenius ENS200EXT User Manual preview
ENS200EXT
Brand: EnGenius Pages: 90
EnGenius ENH202 User Manual preview
ENH202
Brand: EnGenius Pages: 88
Ebyte E22-900T30S1C User Manual preview
E22-900T30S1C
Brand: Ebyte Pages: 27
Linksys WRT54G-TM Quick Installation Manual preview
WRT54G-TM
Brand: Linksys Pages: 2
Ebyte E180-ZG120B User Manual preview
E180-ZG120B
Brand: Ebyte Pages: 46
Ubiquiti AirOS B2 User Manual preview
AirOS B2
Brand: Ubiquiti Pages: 3

Brands by name

Popular brands

Load more brands