manualshive.com logo in svg

Motorola WiNG 5.6, Reference Manual

The Motorola WiNG 5.6 Reference Manual is a comprehensive guide for users of this cutting-edge product. It provides detailed instructions and troubleshooting tips, ensuring seamless operation. You can easily download this invaluable manual for free from our website 88.208.23.73:8080, unlocking the full potential of your Motorola WiNG 5.6 experience.

Share
Download
background image

B - 46 WiNG 5.6 Access Point System Reference Guide 

source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software 
interchange.

If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to 
copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties 
are not compelled to copy the source along with the object code.

5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled 
or linked with it, is called

    a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside 
the scope of this License.

However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because 
it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this 
License. Section 6 states terms for distribution of such executables.

When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work 
may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the 
work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined 
by law.

If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline 
functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a 
derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.)

Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 
6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.

6. As an exception to the Sections above, you may also compile or link a "work that uses the Library" with the Library to produce 
a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit 
modification of the work for the customer's own use and reverse engineering for debugging such modifications.

You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are 
covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you 
must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this 
License. Also, you must do one of these things:

        * a) Accompany the work with the complete corresponding machine-readable source code for the Library including 
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an 
executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or 
source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified 
Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able 
to recompile the application to use the modified definitions.)

        * b) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified 
in Subsection 6a, above, for a charge no more than the cost of performing this distribution.

        * c) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy 
the above specified materials from the same place.

        * d) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.

For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for 
reproducing the executable from it. However, as a special exception, the source code distributed need not include anything that 
is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating 
system on which the executable runs, unless that component itself accompanies the executable.

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.6

H3C MSR 800 Compliance And Safety Manual preview
MSR 800
Brand: H3C Pages: 43
ZyXEL Communications NWA1000 Series User Manual preview
NWA1000 Series
Brand: ZyXEL Communications Pages: 263
Netis WF-2409B Quick Installation Manual preview
WF-2409B
Brand: Netis Pages: 16
Alfa Network AWPCI085P Specifications preview
AWPCI085P
Brand: Alfa Network Pages: 1
Ruckus Wireless ZoneFlex 2741 Getting Started Manual preview
ZoneFlex 2741
Brand: Ruckus Wireless Pages: 58
Silvercrest IAN 276299 Operation And Safety Notes preview
IAN 276299
Brand: Silvercrest Pages: 20
Silvercrest SWR 1166 A1 Operation And Safety Notes preview
SWR 1166 A1
Brand: Silvercrest Pages: 66
Zte R218 Quick Start Manual preview
R218
Brand: Zte Pages: 17
Cyberoam Netgenie NG11E Quick Start Manual preview
Netgenie NG11E
Brand: Cyberoam Pages: 12
Cyberoam NetGenie NG11EO Quick Start Manual preview
NetGenie NG11EO
Brand: Cyberoam Pages: 16
4IPNET OWL530 Quick Installation Manual preview
OWL530
Brand: 4IPNET Pages: 26
Icom RS-AP3 Instruction Manual preview
RS-AP3
Brand: Icom Pages: 119
Multitech MultiModem rCell MTCBA-H3-EN3-P1 User Manual preview
MultiModem rCell MTCBA-H3-EN3-P1
Brand: Multitech Pages: 71
Multitech MultiModem rCell User Manual preview
MultiModem rCell
Brand: Multitech Pages: 100
Ebyte E220-230T30D User Manual preview
E220-230T30D
Brand: Ebyte Pages: 23
TECOM BT3034 User Manual preview
BT3034
Brand: TECOM Pages: 18
TECOM WL5030 User Manual preview
WL5030
Brand: TECOM Pages: 16
Rittal DK 7320.240 Assembly, Installation And Operation Instructions preview
DK 7320.240
Brand: Rittal Pages: 20

Brands by name

Popular brands

Load more brands