manualshive.com logo in svg

Motorola WiNG 5.6, Reference Manual

The Motorola WiNG 5.6 Reference Manual is a comprehensive guide for users of this cutting-edge product. It provides detailed instructions and troubleshooting tips, ensuring seamless operation. You can easily download this invaluable manual for free from our website 88.208.23.73:8080, unlocking the full potential of your Motorola WiNG 5.6 experience.

Share
Download
background image

Publicly Available Software B - 57

non-compliance by some reasonable means, this is the first time You have received notice of non-compliance with this License 
from such Contributor, and You become compliant prior to 30 days after Your receipt of the notice.

    5.2. If You initiate litigation against any entity by asserting a patent infringement claim (excluding declaratory judgment 
actions, counter-claims, and cross-claims) alleging that a Contributor Version directly or indirectly infringes any patent, then 
the rights granted to You by any and all Contributors for the Covered Software under Section 2.1 of this License shall terminate.

    5.3. In the event of termination under Sections 5.1 or 5.2 above, all end user license agreements (excluding distributors and 
resellers) which have been validly granted by You or Your distributors under this License prior to termination shall survive 
termination.

    6. Disclaimer of Warranty

Covered Software is provided under this License on an â€œas isâ€? basis, without warranty of any kind, either expressed, 
implied, or statutory, including, without limitation, warranties that the Covered Software is free of defects, merchantable, fit 
for a particular purpose or non-infringing. The entire risk as to the quality and performance of the Covered Software is with 
You. Should any Covered Software prove defective in any respect, You (not any Contributor) assume the cost of any necessary 
servicing, repair, or correction. This disclaimer of warranty constitutes an essential part of this License. No use of any Covered 
Software is authorized under this License except under this disclaimer.

    7. Limitation of Liability

Under no circumstances and under no legal theory, whether tort (including negligence), contract, or otherwise, shall any 
Contributor, or anyone who distributes Covered Software as permitted above, be liable to You for any direct, indirect, special, 
incidental, or consequential damages of any character including, without limitation, damages for lost profits, loss of goodwill, 
work stoppage, computer failure or malfunction, or any and all other commercial damages or losses, even if such party shall 
have been informed of the possibility of such damages. This limitation of liability shall not apply to liability for death or personal 
injury resulting from such party’s negligence to the extent applicable law prohibits such limitation. Some jurisdictions do 
not allow the exclusion or limitation of incidental or consequential damages, so this exclusion and limitation may not apply to 
You.

    8. Litigation

Any litigation relating to this License may be brought only in the courts of a jurisdiction where the defendant maintains its 
principal place of business and such litigation shall be governed by laws of that jurisdiction, without reference to its 
conflict-of-law provisions. Nothing in this Section shall prevent a party’s ability to bring cross-claims or counter-claims.

    9. Miscellaneous

This License represents the complete agreement concerning the subject matter hereof. If any provision of this License is held 
to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. Any law or regulation 
which provides that the language of a contract shall be construed against the drafter shall not be used to construe this License 
against a Contributor.

    10. Versions of the License

    10.1. New Versions

Mozilla Foundation is the license steward. Except as provided in Section 10.3, no one other than the license steward has the 
right to modify or publish new versions of this License. Each version will be given a distinguishing version number.

    10.2. Effect of New Versions

You may distribute the Covered Software under the terms of the version of the License under which You originally received the 
Covered Software, or under the terms of any subsequent version published by the license steward.

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.6

Maestro E206XT Manual preview
E206XT
Brand: Maestro Pages: 4
Ubiquiti BulletM2-HP Quick Start Manual preview
BulletM2-HP
Brand: Ubiquiti Pages: 12
Ebyte E18-MS1PA-PCB User Manual preview
E18-MS1PA-PCB
Brand: Ebyte Pages: 16
SMC Networks 7904WBRA Quick Installation Manual preview
7904WBRA
Brand: SMC Networks Pages: 2
Ubiquiti NanoBeam M2 Quick Start Manual preview
NanoBeam M2
Brand: Ubiquiti Pages: 28
Ubiquiti UAP-AC-SHD Quick Start Manual preview
UAP-AC-SHD
Brand: Ubiquiti Pages: 32
Cisco AT&T U-VERSE VEN401 User Manual preview
AT&T U-VERSE VEN401
Brand: Cisco Pages: 52
Cisco Aironet 2600 Series Getting Started Manual preview
Aironet 2600 Series
Brand: Cisco Pages: 38
Cisco C9117AXI-ME-x Getting Started Manual preview
C9117AXI-ME-x
Brand: Cisco Pages: 36
Cisco Aironet 1850 Series Deployment Manual preview
Aironet 1850 Series
Brand: Cisco Pages: 67
Cisco Aironet 3600 Series Getting Started Manual preview
Aironet 3600 Series
Brand: Cisco Pages: 40
Cisco DigiStar E320.1 User Manual preview
DigiStar E320.1
Brand: Cisco Pages: 18
Cisco Aironet 700W Series Getting Started Manual preview
Aironet 700W Series
Brand: Cisco Pages: 31
Cisco DPH650 User Manual preview
DPH650
Brand: Cisco Pages: 36
Cisco Aironet 1815T Getting Started Manual preview
Aironet 1815T
Brand: Cisco Pages: 29
Cisco C9130AXE Series Getting Started Manual preview
C9130AXE Series
Brand: Cisco Pages: 48
Cisco Aironet OfficeExtend AIR-OEAP602I-E-K9 User Manual preview
Aironet OfficeExtend AIR-OEAP602I-E-K9
Brand: Cisco Pages: 26
Cisco Aironet 2700 Series Deployment Manual preview
Aironet 2700 Series
Brand: Cisco Pages: 88

Brands by name

Popular brands

Load more brands