manualshive.com logo in svg

Motorola WiNG 5.6, Reference Manual

The Motorola WiNG 5.6 Reference Manual is a comprehensive guide for users of this cutting-edge product. It provides detailed instructions and troubleshooting tips, ensuring seamless operation. You can easily download this invaluable manual for free from our website 88.208.23.73:8080, unlocking the full potential of your Motorola WiNG 5.6 experience.

Share
Download
background image

4

WiNG 5.6 Access Point System Reference Guide 

Motorola Solutions 
End-User Software License Agreement

THIS MOTOROLA SOLUTIONS END-USER SOFTWARE LICENSE AGREEMENT (“END-USER LICENSE AGREEMENT”) IS 
BETWEEN MOTOROLA SOLUTIONS INC. (HEREIN “MOTOROLA SOLUTIONS”) AND END-USER CUSTOMER TO WHOM 
MOTOROLA SOLUTIONS’ PROPRIETARY SOFTWARE OR MOTOROLA SOLUTIONS PRODUCTS CONTAINING EMBEDDED, PRE-
LOADED, OR INSTALLED SOFTWARE (“PRODUCTS”) IS MADE AVAILABLE. THIS END-USER LICENSE AGREEMENT CONTAINS 
THE TERMS AND CONDITIONS OF THE LICENSE MOTOROLA SOLUTIONS IS PROVIDING TO END-USER CUSTOMER, AND END-
USER CUSTOMER’S USE OF THE SOFTWARE AND DOCUMENTATION. BY USING, DOWNLOADING OR INSTALLING THIS 
SOFTWARE, YOU OR THE ENTITY THAT YOU REPRESENT (“END-USER CUSTOMER”) ARE CONSENTING TO BE BOUND BY AND 
ARE BECOMING A PARTY TO THIS END-USER LICENSE AGREEMENT.

1. DEFINITIONS

“Documentation” means product and software documentation that specifies technical and performance features and 
capabilities, and the user, operation and training manuals for the Software (including all physical or electronic media upon 
which such information is provided).

“Open Source Software” means software with either freely obtainable source code license for modification, or permission 
for free distribution.

“Open Source Software License” means the terms or conditions under which the Open Source Software is licensed.

“Software” (i) means proprietary software in object code format, and adaptations, translations, decompilations, 
disassemblies, emulations, or derivative works of such software; (ii) means any modifications, enhancements, new versions 
and new releases of the software provided by Motorola Solutions; and (iii) may contain items of software owned by a third 
party supplier.  The term “Software” does not include any third party software provided under separate license or third party 
software not licensable under the terms of this Agreement. To the extent, if any, that there is a separate license agreement 
packaged with, or provided electronically with, a particular Product that becomes effective on an act of acceptance by the 
end user, then that agreement supersedes this End-User License Agreement as to the end use of that particular Product.

2. GRANT OF LICENSE

2.1 Subject to the provisions of this End-User License Agreement, Motorola Solutions grants to End-User Customer a 

personal, limited, non-transferable (except as provided in Section 4), and non-exclusive license under Motorola 
Solutions’ copyrights and confidential information embodied in the Software to use the Software, in object code form, 
and the Documentation solely in connection with End-User Customer’s use of the Products. This End-User License 
Agreement does not grant any rights to source code.

2.2 If the Software licensed under this End-User License Agreement contains or is derived from Open Source Software, the 

terms and conditions governing the use of such Open Source Software are in the Open Source Software Licenses of the 
copyright owner and not this End-User License Agreement. If there is a conflict between the terms and conditions of 
this End-User License Agreement and the terms and conditions of the Open Source Software Licenses governing End-
User Customer’s use of the Open Source Software, the terms and conditions of the license grant of the applicable Open 
Source Software Licenses will take precedence over the license grants in this End-User License Agreement. If requested 
by End-User Customer, Motorola Solutions will use commercially reasonable efforts to: (i) determine whether any Open 
source Software is provided under this End-User License Agreement; (ii) identify the Open Source Software and provide 
End-User Customer a copy of the applicable Open Source Software License (or specify where that license may be found); 
and, (iii) provide End-User Customer a copy of the Open Source Software source code, without charge, if it is publicly 
available (although distribution fees may be applicable).

3. LIMITATIONS ON USE

3.1 End-User Customer may use the Software only for End-User Customer’s internal business purposes and only in 

accordance with the Documentation. Any other use of the Software is strictly prohibited and will be deemed a breach 
of this End-User License Agreement. Without limiting the general nature of these restrictions, End-User Customer will 

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.6

Hakko Electronics Monitouch V9 Series Technical Information preview
Monitouch V9 Series
Brand: Hakko Electronics Pages: 16
T-Mobile Franklin T9 Getting Started preview
Franklin T9
Brand: T-Mobile Pages: 4
Watchguard WGA15731 Hardware Manual preview
WGA15731
Brand: Watchguard Pages: 28
APM ALINE-5801A+G Specification Sheet preview
ALINE-5801A+G
Brand: APM Pages: 2
Kraun KR.2N User Manual preview
KR.2N
Brand: Kraun Pages: 55
Loopcomm LP-2396K User Manual preview
LP-2396K
Brand: Loopcomm Pages: 94
Sitecom AC750 User Manual preview
AC750
Brand: Sitecom Pages: 54
Samsung WEA412h Quick Installation Manual preview
WEA412h
Brand: Samsung Pages: 2
Samsung WEA400 Series Quick Installation Manual preview
WEA400 Series
Brand: Samsung Pages: 2
Samsung WEA302i Installation Manual preview
WEA302i
Brand: Samsung Pages: 2
Samsung WAP-701 User Manual preview
WAP-701
Brand: Samsung Pages: 26
Samsung SMT-R2000 User Manual preview
SMT-R2000
Brand: Samsung Pages: 28
Samsung SFG-D0100 Installation Manual preview
SFG-D0100
Brand: Samsung Pages: 29
Samsung SWL-4000AP Series User Manual preview
SWL-4000AP Series
Brand: Samsung Pages: 89
Spectrum 24 AP-3020 Quick Reference Manual preview
AP-3020
Brand: Spectrum 24 Pages: 2
Cisco MERAKI MR57 Installation Manual preview
MR57
Brand: Cisco MERAKI Pages: 27
Belden Hirschmann BAT-F Series User Manual preview
Hirschmann BAT-F Series
Brand: Belden Pages: 72
Belden Hirschmann OpenBAT BAT-R User Manual preview
Hirschmann OpenBAT BAT-R
Brand: Belden Pages: 76

Brands by name

Popular brands

Load more brands