manualshive.com logo in svg

Motorola WiNG 5.6, Reference Manual

The Motorola WiNG 5.6 Reference Manual is a comprehensive guide for users of this cutting-edge product. It provides detailed instructions and troubleshooting tips, ensuring seamless operation. You can easily download this invaluable manual for free from our website 88.208.23.73:8080, unlocking the full potential of your Motorola WiNG 5.6 experience.

Share
Download
background image

About this Guide

 5

not make the Software available for use by third parties on a “time sharing,” “application service provider,” or “service 
bureau” basis or for any other similar commercial rental or sharing arrangement.

3.2 End-User Customer will not, and will not allow or enable any third party to: (i) reverse engineer, disassemble, peel 

components, decompile, reprogram or otherwise reduce the Software or any portion to a human perceptible form or 
otherwise attempt to recreate the source code; (ii) modify, adapt, create derivative works of, or merge the Software with 
other software; (iii) copy, reproduce, distribute, lend, or lease the Software or Documentation to any third party, grant 
any sublicense or other rights in the Software or Documentation to any third party, or take any action that would cause 
the Software or Documentation to be placed in the public domain; (iv) remove, or in any way alter or obscure, any 
copyright notice or other notice of Motorola Solutions’ proprietary rights; (v) provide, copy, transmit, disclose, divulge 
or make the Software or Documentation available to, or permit the use of the Software by any third party or on any 
machine except as expressly authorized by this Agreement; or (vi) use, or permit the use of, the Software in a manner 
that would result in the production of a copy of the Software solely by activating a machine containing the Software. 
End-User Customer may make one copy of Software to be used solely for archival, back-up, or disaster recovery 
purposes; provided that End-User Customer may not operate that copy of the Software at the same time as the original 
Software is being operated. End-User Customer may make as many copies of the Documentation as it may reasonably 
require for the internal use of the Software. 

3.3 Unless otherwise authorized by Motorola Solutions in writing, End-User Customer will not, and will not enable or allow 

any third party to: (i) install a licensed copy of the Software on more than one unit of a Product; or (ii) copy onto or 
transfer Software installed in one unit of a Product onto another device.

3.4 If End-User Customer is purchasing Products that require a site license, End-User Customer must purchase a copy of the 

applicable Software for each site at which End-User Customer uses such Software. End-User Customer may make one 
additional copy for each computer owned or controlled by End-User Customer at each such site. End-User Customer may 
temporarily use the Software on portable or laptop computers at other sites. End-User Customer must provide a written 
list of all sites where End-User Customer uses or intends to use the Software.

4. TRANSFERS

4.1 End-User Customer will not transfer the Software or Documentation to any third party without Motorola Solutions’ prior 

written consent. Motorola Solutions’ consent may be withheld at its discretion and may be conditioned upon transferee 
paying all applicable license fees and agreeing to be bound by this End-User License Agreement.

5. OWNERSHIP AND TITLE

5.1 Motorola Solutions, its licensors, and its suppliers retain all of their proprietary rights in any form in and to the Software 

and Documentation, including, but not limited to, all rights in patents, patent applications, inventions, copyrights, 
trademarks, trade secrets, trade names, and other proprietary rights in or relating to the Software and Documentation. 
No rights are granted to End-User Customer under this Agreement by implication, estoppel or otherwise, except for 
those rights which are expressly granted to End-User Customer in this End-User License Agreement. All intellectual 
property developed, originated, or prepared by Motorola Solutions in connection with providing the Software, Products, 
Documentation or related services remains vested exclusively in Motorola Solutions, and End-User Customer will not 
have any shared development or other intellectual property rights.

6. CONFIDENTIALITY

6.1 End-User Customer acknowledges that the Software contains valuable proprietary information and trade secrets and 

that unauthorized dissemination, distribution, modification, reverse engineering, disassembly or other improper use of 
the Software will result in irreparable harm to Motorola Solutions for which monetary damages would be inadequate. 
Accordingly, End-User Customer will limit access to the Software to those of its employees and agents who need to use 
the Software for End-User Customer’s internal business.

7. MAINTENANCE AND SUPPORT

7.1 No maintenance or support is provided under this End-User License Agreement. Maintenance or support, if available, 

will be provided under a separate Motorola Solutions Software maintenance and support agreement.

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.6

D-Link AirPlusXtremeG DI-624 Manual preview
AirPlusXtremeG DI-624
Brand: D-Link Pages: 83
D-Link AirPlusXtremeG DI-624 User Manual preview
AirPlusXtremeG DI-624
Brand: D-Link Pages: 97
Panasonic DNSK-P11 User Manual preview
DNSK-P11
Brand: Panasonic Pages: 18
Panasonic PAN9420 Design Manual preview
PAN9420
Brand: Panasonic Pages: 29
Tenda W541R User Manual preview
W541R
Brand: Tenda Pages: 57
HameTech HM-434 Instruction Manual preview
HM-434
Brand: HameTech Pages: 42
Nexxt Nyx300 Quick Installation Manual preview
Nyx300
Brand: Nexxt Pages: 2
NETGEAR WAX618 User Manual preview
WAX618
Brand: NETGEAR Pages: 263
Belkin F5D8231-4ei User Manual preview
F5D8231-4ei
Brand: Belkin Pages: 104
3Com 8760 - Wireless Dual Radio 11a/b/g PoE Access... Datasheet preview
8760 - Wireless Dual Radio 11a/b/g PoE Access...
Brand: 3Com Pages: 8
Z-Com XG-580 PLUS User Manual preview
XG-580 PLUS
Brand: Z-Com Pages: 23
Ebyte E22-400M30S User Manual preview
E22-400M30S
Brand: Ebyte Pages: 13
Buffalo AirStation Nfiniti WZR-AG300NH User Manual preview
AirStation Nfiniti WZR-AG300NH
Brand: Buffalo Pages: 48
LevelOne WAP-8111 Quick Installation Manual preview
WAP-8111
Brand: LevelOne Pages: 31
WIDCOMM BT0002M3 User Manual preview
BT0002M3
Brand: WIDCOMM Pages: 41
Ekselans AP 1200 User Manual preview
AP 1200
Brand: Ekselans Pages: 25
NETGEAR Orbi PRO SRS60 Quick Start preview
Orbi PRO SRS60
Brand: NETGEAR Pages: 2
Well Straler B6R-W2 Installation Instructions Manual preview
B6R-W2
Brand: Well Straler Pages: 16

Brands by name

Popular brands

Load more brands