Device Configuration 5 - 145
6. Select
OK
to save the updates made to the
Auto IPSec Tunnel
screen. Selecting
Reset
reverts the screen to its last saved
configuration.
5.2.7.3 Defining Profile Security Settings
Profile Security Configuration
A profile can leverage existing firewall, wireless client role and WIPS policies and configurations and apply them to the profile’s
configuration. This affords each profile a truly unique combination of data protection policies best meeting the data protection
requirements of the access point’s numerous deployment scenarios.
To define a profile’s security settings:
1. Select the
Configuration
tab from the Web UI.
2. Select
Devices
.
3. Select
System Profile
from the options on left-hand side of the UI.
4. Expand the
Security
menu and select
Settings
.
Figure 5-93
Profile Security - Settings screen
5. Select a firewall policy from the
Firewall Policy
drop-down menu. All devices using this profile must meet the
requirements of the firewall policy to access the network. A firewall is a mechanism enforcing access control, and is
considered a first line of defense in protecting proprietary information within the network. The means by which this is
accomplished varies, but in principle, a firewall can be thought of as mechanisms both blocking and permitting data traffic
within the network. If an existing Firewall policy does not meet your requirements, select the
Create
icon to create a new
firewall policy that can be applied to this profile. An existing policy can also be selected and edited as needed using the
Edit
icon.
6. Select the
WEP Shared Key Authentication
radio button to require profile supported devices to use a WEP key to access
the network using this profile. The access point, other proprietary routers, and Motorola Solutions clients use the key
algorithm to convert an ASCII string to the same hexadecimal number. Clients without Motorola Solutions adapters need
to use WEP keys manually configured as hexadecimal numbers. This option is disabled by default.
7. Client Identity is a set of unique fingerprints used to identify a class of devices. This information is used to configure
permissions and access rules for devices classes in the network.
Client Identity Group
is a collection of client identities
that identify devices and applies specific permissions and restrictions on these devices. From the drop-down menu select
the client identity group to use with this device profile. For more information, see
Device Fingerprinting on page 8-23
.
8. Select
OK
to save the changes made within the
Settings
screen. Select
Reset
to revert to the last saved configuration.
IKE Life Time
Set a lifetime in either
Seconds
(600 - 86,400),
Minutes
(10 - 1,440),
Hours
(1 - 24) or
Days
(1) for IKE security association duration. The default is 8600 seconds.
Summary of Contents for WiNG 5.6
