Motorola WiNG 5.6 Reference Manual Download | Manualshive

Page: 297 / 1048

background image

Device Configuration 5 - 211

5. Set the following

Additional Credentials

required for the generation of the self-signed certificate:

6. Select the

Generate Certificate

button at the bottom of the screen to generate the certificate.

5.4.2.1.3 Generating a Certificate Signing Request

Certificate Management

A

certificate signing request

(CSR) is an application from a requestor to a certificate authority to issue a digitally signed identity

certificate. The CSR is composed of a block of encrypted text generated on the server the certificate will be used on. It contains
information included in the certificate, including organization name, common name (domain name), locality and country.

A RSA key must be either created or applied to the certificate request before the certificate can be generated. A private key is
not included in the CSR, but is used to digitally sign the completed request. The certificate created with a particular CSR only
worked with the private key generated with it. If the private key is lost, the certificate is no longer functional. The CSR can be
accompanied by other identity credentials required by the certificate authority, and the certificate authority maintains the right
to contact the applicant for additional information.

If the request is successful, the CA sends an identity certificate digitally signed with the private key of the CA.

To create a CSR:

1. Select the

Launch Manager

button from either the

SSH RSA Key

or

RADIUS Server Certificate

parameters (within the

Certificate Management

screen).

2. Select

Create

CSR

from the upper, left-hand, side of the

Certificate Management

screen.

State (ST)

Enter a State for the state or province name used in the certificate. This is a required field.

City (L)

Enter a City to represent the city name used in the certificate. This is a required field.

Organization (O)

Define an Organization for the organization used in the certificate. This is a required field.

Organizational Unit (OU)

Enter an Organizational Unit for the name of the organization unit used in the certificate.
This is a required field.

Common Name (CN)

If there’s a common name (IP address) for the organizational unit issuing the certificate,
enter it here.

Email Address

Provide an E-mail address used as the contact address for issues relating to this
certificate request.

Domain Name

Enter a

fully qualified domain name

(FQDN) as an unambiguous domain name that

specifies the node's position in the DNS tree hierarchy. To distinguish an FQDN from a
regular domain name, a trailing period is added. For example, somehost.example.com. An
FQDN differs from a regular domain name by its absoluteness, since s a suffix is not
added.

IP Address

Specify the IP address used as the destination for certificate requests.

«
...
295
296
297
298
299
...
»

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.6

Brand: Pakedge Pages: 3

Brand: H3C Pages: 16

Brand: H3C Pages: 22

Brand: H3C Pages: 13

Brand: H3C Pages: 8

Brand: H3C Pages: 17

Brand: H3C Pages: 105

Brand: H3C Pages: 7

Brand: AOLYNK Pages: 6

Brand: Z-Com Pages: 23

Brand: ALTAI Pages: 16

Brand: Gainstrong Pages: 14

Brand: UniFi Pages: 45

UniFi UAP-AC-LITE

Brand: Ubiquiti Pages: 28

Brand: TRENDnet Pages: 93

cnPilot E410 Indoor

Brand: Cambium Networks Pages: 52

Brand: Cambium Networks Pages: 51

ORINOCO AP-4000MR

Brand: Proxim Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands