manualshive.com logo in svg

Motorola WiNG 5.6, Reference Manual

The Motorola WiNG 5.6 Reference Manual is a comprehensive guide for users of this cutting-edge product. It provides detailed instructions and troubleshooting tips, ensuring seamless operation. You can easily download this invaluable manual for free from our website 88.208.23.73:8080, unlocking the full potential of your Motorola WiNG 5.6 experience.

Share
Download
background image

Device Configuration 5 - 255

11. Set or override the following profile WLAN Properties for the selected access point radio:

Rate Selection Methods

Use the drop-down menu to specify the algorithm to use for rate selection. Select 

Standard

 to use the standard rate selection algorithm. Select 

Opportunistic

 to use the 

Opportunistic rate selection algorithm.

NOTE: 

 AP7131, AP6522, AP6522M, AP6532, AP6562, AP8132, AP8232, AP7181 and 

AP7161 model access points can support up to 256 client connections to a single access 
point radio. AP6511 and AP6521 model access points (both single radio models) can 
support up to 128 client connections to a single radio.

Beacon Interval

Set the interval between radio beacons in milliseconds (either 

50

, 

100

 or 

200

).   A beacon 

is a packet broadcast by adopted radios to keep the network synchronized. Included in a 
beacon is information such as the WLAN service area, the radio address, the broadcast 
destination addresses, a time stamp, and indicators about traffic and delivery such as a 
DTIM. Increase the DTIM/beacon settings (lengthening the time) to let nodes sleep longer 
and preserve battery life. Decrease these settings (shortening the time) to support 
streaming-multicast audio and video applications that are jitter-sensitive.The default 
value is 100 milliseconds.

DTIM Interval

Set a DTIM Interval to specify a period for 

Delivery Traffic Indication Messages

 (DTIM). A 

DTIM is periodically included in a beacon frame transmitted from adopted radios. The 
DTIM indicates broadcast and multicast frames (buffered at the access point) are soon to 
arrive. These are simple data frames that require no acknowledgement, so nodes 
sometimes miss them. Increase the DTIM/ beacon settings (lengthening the time) to let 
nodes sleep longer and preserve their battery life. Decrease these settings (shortening 
the time) to support streaming multicast audio and video applications that are jitter-
sensitive. 

RTS Threshold

Specify a 

Request To Send

 (RTS) threshold (from 1 - 2,347 bytes) for use by the WLAN's 

adopted access point radios. RTS is a transmitting station's signal that requests a 

Clear 

To Send

 (CTS) response from a receiving client. This RTS/CTS procedure clears the air 

where clients are contending for transmission time. Benefits include fewer data collisions 
and better communication with nodes that are hard to find (or hidden) because of other 
active nodes in the transmission path.

Control RTS/CTS by setting an RTS threshold. This setting initiates an RTS/CTS exchange 
for data frames larger than the threshold, and sends (without RTS/CTS) any data frames 
smaller than the threshold.

Consider the trade-offs when setting an appropriate RTS threshold for the WLAN's access 
point radios. A lower RTS threshold causes more frequent RTS/CTS exchanges. This 
consumes more bandwidth because of additional latency (RTS/CTS exchanges) before 
transmissions can commence. A disadvantage is the reduction in data-frame throughput. 
An advantage is quicker system recovery from electromagnetic interference and data 
collisions. Environments with more wireless traffic and contention for transmission make 
the best use of a lower RTS threshold.

A higher RTS threshold minimizes RTS/CTS exchanges, consuming less bandwidth for 
data transmissions. A disadvantage is less help to nodes that encounter interference and 
collisions. An advantage is faster data-frame throughput. Environments with less 
wireless traffic and contention for transmission make the best use of a higher RTS 
threshold. 

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.6

Maestro E206XT Manual preview
E206XT
Brand: Maestro Pages: 4
Ubiquiti Rocket Prism AC GEN 2 RP-5AC-Gen2 Quick Start Manual preview
Rocket Prism AC GEN 2 RP-5AC-Gen2
Brand: Ubiquiti Pages: 28
VT Miltope nMAP2 Quick Start Manual preview
nMAP2
Brand: VT Miltope Pages: 32
ZyXEL Communications G-1000 V2 Quick Start Manual preview
G-1000 V2
Brand: ZyXEL Communications Pages: 11
Abocom AP700C User Manual preview
AP700C
Brand: Abocom Pages: 37
Mach Power WL-ICNAP24-074 User Manual preview
WL-ICNAP24-074
Brand: Mach Power Pages: 24
NETGEAR WGR612 - 54 Mbps Wireless Router Datasheet preview
WGR612 - 54 Mbps Wireless Router
Brand: NETGEAR Pages: 2
Buffalo AisStation WHR-G54S User Manual preview
AisStation WHR-G54S
Brand: Buffalo Pages: 82
TP-Link Archer A8 User Manual preview
Archer A8
Brand: TP-Link Pages: 94
Linksys 5G WiFi 6 User Manual preview
5G WiFi 6
Brand: Linksys Pages: 49
Linksys WAP54G v2 User Manual preview
WAP54G v2
Brand: Linksys Pages: 70
Linksys EA6350 V2 User Manual preview
EA6350 V2
Brand: Linksys Pages: 17
Technicolor TC8717C Setup And User Manual preview
TC8717C
Brand: Technicolor Pages: 80
KTI Networks KVB-311 User Manual preview
KVB-311
Brand: KTI Networks Pages: 101
Blake UK PPROCEPTION ROAPCEILING Advanced Instructions preview
PPROCEPTION ROAPCEILING
Brand: Blake UK Pages: 15
Nexiom TR307 Quick Installation Manual preview
TR307
Brand: Nexiom Pages: 3
Intellinet 525787 Quick Install Manual preview
525787
Brand: Intellinet Pages: 20
Intellinet 524957 User Manual preview
524957
Brand: Intellinet Pages: 56

Brands by name

Popular brands

Load more brands