6 - 66 WiNG 5.6 Access Point System Reference Guide
9. Set the following
Low (Background) Access
settings for the radio QoS policy:
10. Select
OK
when completed to update the radio QoS settings for this policy. Select
Reset
to revert back to last saved
configuration.
11. Select the
Admission Control
tab to configure an admission control configuration for selected radio QoS policy. Admission
control requires clients send their
traffic specifications
(TSPEC) to a managed access point before they can transmit or
receive data within the access point managed network.
The name of the radio QoS policy, for which the admission control settings apply, displays in the banner of the QoS Policy
screen.
ECW Min
ECW Min
is combined with
ECW Max
to create a contention value in the form of a
numerical range. From this range, a random number is selected for the back off
mechanism. Lower values are used for higher priority traffic (like video). The available
range is from 0-15. The default value is 3.
ECW Max
ECW Max
is combined with
ECW Min
to create a contention value in the form of a
numerical range. From this range, a random number is selected for the back off
mechanism. Lower values are used for higher priority traffic (like video). The available
range is from 0-15. The default value is 4.
Transmit Ops
Use the slider to set the maximum duration a device can transmit after obtaining a
transmit opportunity. For higher-priority traffic categories, this value should be set to a low
number. The default value is 0.
AIFSN
Set the current AIFSN from 1- 15. Higher-priority traffic voice categories should have
lower AIFSNs than lower-priority traffic categories. This will cause lower-priority traffic to
wait longer before attempting access. The default value is 7.
ECW Min
ECW Min
is combined with
ECW Max
to create a contention value in the form of a
numerical range. From this range, a random number is selected for the back off
mechanism. Higher values are used for lower priority traffic (like low). The available range
is from 0-15. The default value is 4.
ECW Max
ECW Max
is combined with
ECW Min
to create a contention value in the form of a
numerical range. From this range, a random number is selected for the back off
mechanism. Lower values are used for higher priority traffic (like video). The available
range is from 0-15. The default value is 10.
Summary of Contents for WiNG 5.6
