Motorola WiNG 5.6 Reference Manual Download | Manualshive

Page: 845 / 1048

background image

Statistics 13 - 37

Neighbor MP ID

The MAC Address that the device uses to define the mesh point in the device that the
neighbor is a part of. It is used to distinguish the device that is the neighbor.

Neighbor IFID

The MAC Address used by the interface on the neighbor device to communicate with this
device. This may define a particular radio or Ethernet port that communicates with this
device over the mesh.

Root MP ID

The MAC Address of the neighbor's root mesh point.

Is Root

A root mesh point is defined as a mesh point that is connected to the WAN and provides
a wired backhaul to the network.

Yes

if the mesh point that is the neighbor is a root mesh

point or

No

if the mesh point that is the neighbor is not a root mesh point.

Mobility

Displays whether the mesh point is a mobile or static node. Displays

True

when the device

is mobile and

False

when the device is not mobile.

Radio Interface

This indicates the interface that is used by the device to communicate with this neighbor.
The values are

2.4

and

5.0

, indicating the frequency of the radio that is used to

communicate with the neighbor.

Mesh Root Hops

The number of devices between the neighbor and its root mesh point. If the neighbor is a
root mesh point, this value will be

0

. If the neighbor is not a root mesh point but it has a

neighbor that is a root mesh point, this value will be

1

. Each mesh point between the

neighbor and its root mesh point is counted as 1 hop.

Resourced

Displays whether the mesh point has been resourced or not. The Mesh Connex neighbor
table can contain more neighbors than the AP supports. If the neighbor is resourced, it will
take away a one of the resources for a wireless client device to be used for meshing.
Displays

True

when the device is resourced and

False

when the device is not.

Link Quality

An abstract value depicting the quality of the mesh link between the device and the
neighbor. The range is from 0 (weakest) to 100 (strongest).

Link Metric

This value shows the computed path metric from the device to the neighbor mesh point
using this interface. The lower the number the better the possibility that the neighbor will
be chosen as the path to the root mesh point.

Root Metric

The computed path metric between the neighbor and their root mesh point.

«
...
843
844
845
846
847
...
»

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.6

Brand: Calix Pages: 225

PremierWave 2050

Brand: Lantronix Pages: 2

Brand: EAS Electric Pages: 110

Brand: CES Pages: 30

FriendlyNET FR3002AL

Brand: Asante Pages: 16

Brand: Cranberry Pages: 2

Brand: Acer Pages: 63

Brand: Acer Pages: 38

Predator Connect X5 5G CPE

Brand: Acer Pages: 56

Brand: Acer Pages: 39

Brand: Acer Pages: 7

Brand: Icidu Pages: 11

Brand: Icidu Pages: 16

Brand: Icidu Pages: 19

Brand: Link electronics Pages: 34

RTA2600 HighPower

Brand: Amped Wireless Pages: 2

Brand: Amped Wireless Pages: 2

TITAN-AP APA1900

Brand: Amped Wireless Pages: 78

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands