manualshive.com logo in svg

Motorola WiNG 5.6, Reference Manual

The Motorola WiNG 5.6 Reference Manual is a comprehensive guide for users of this cutting-edge product. It provides detailed instructions and troubleshooting tips, ensuring seamless operation. You can easily download this invaluable manual for free from our website 88.208.23.73:8080, unlocking the full potential of your Motorola WiNG 5.6 experience.

Share
Download
background image

B - 12 WiNG 5.6 Access Point System Reference Guide 

of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against 
any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within 
the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License 
for that Work shall terminate as of the date such litigation is filed.

4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or 

without modifications, and in Source or Object form, provided that You meet the following conditions:

a. You must give any other recipients of the Work or Derivative Works a copy of this License; and

b. You must cause any modified files to carry prominent notices stating that You changed the files; and

c. You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and 

attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the 
Derivative Works; and

d. If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must 

include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do 
not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file 
distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the 
Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices 
normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You 
may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the 
NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the 
License.

You may add Your own copyright statement to Your modifications and may provide additional or different license terms and 
conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided 
Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.

5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion 

in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or 
conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license 
agreement you may have executed with Licensor regarding such Contributions.

6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names 

of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing 
the content of the NOTICE file.

7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each 

Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either 
express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, 
MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the 
appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions 
under this License.

8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, 

unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any 
Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any 
character arising as a result of this License or out of the use or inability to use the Work (including but not limited to 
damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or 
losses), even if such Contributor has been advised of the possibility of such damages.

9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to 

offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent 
with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole 
responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor 

Summary of Contents for WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.6

AirM2M A6501 User Manual preview
A6501
Brand: AirM2M Pages: 64
Ubiquiti GigaBeam Quick Start Manual preview
GigaBeam
Brand: Ubiquiti Pages: 22
Planet WAP-7000 User Manual preview
WAP-7000
Brand: Planet Pages: 29
Pakedge W6x User Manual preview
W6x
Brand: Pakedge Pages: 62
United Security Products AD-2001 Owner'S Manual preview
AD-2001
Brand: United Security Products Pages: 16
3Com 3CRWE91096A - Wireless LAN Building-to-Building... Datasheet preview
3CRWE91096A - Wireless LAN Building-to-Building...
Brand: 3Com Pages: 2
Ubiquiti NBE--2AC--13 Quick Start Manual preview
NBE--2AC--13
Brand: Ubiquiti Pages: 17
Emka Electronics 3000-U981-02 User Manual preview
3000-U981-02
Brand: Emka Electronics Pages: 7
PROLiNK PRT7010L Quick Installation Manual preview
PRT7010L
Brand: PROLiNK Pages: 28
Linksys AC1200 User Manual preview
AC1200
Brand: Linksys Pages: 123
Linksys EA6350 V2 User Manual preview
EA6350 V2
Brand: Linksys Pages: 17
Linksys MAX-STREAM EA7250 User Manual preview
MAX-STREAM EA7250
Brand: Linksys Pages: 20
Cisco AT&T U-VERSE VEN401 User Manual preview
AT&T U-VERSE VEN401
Brand: Cisco Pages: 52
Cisco Aironet 2600 Series Getting Started Manual preview
Aironet 2600 Series
Brand: Cisco Pages: 38
Cisco C9117AXI-ME-x Getting Started Manual preview
C9117AXI-ME-x
Brand: Cisco Pages: 36
Cisco Aironet 1850 Series Deployment Manual preview
Aironet 1850 Series
Brand: Cisco Pages: 67
Cisco Aironet 3600 Series Getting Started Manual preview
Aironet 3600 Series
Brand: Cisco Pages: 40
Cisco DigiStar E320.1 User Manual preview
DigiStar E320.1
Brand: Cisco Pages: 18

Brands by name

Popular brands

Load more brands