manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

The Motorola WiNG 5.7.1 System Reference Manual is a comprehensive guide providing detailed instructions on operating and configuring the Motorola WiNG 5.7.1 system. Discover all the necessary information in this manual, available for free download at 88.208.23.73:8080, ensuring a seamless user experience for your Motorola WiNG 5.7.1 product.

Share
Download
background image

B - 10 WiNG 5.7.1 Access Point System Reference Guide 

B.3

 

OSS Licenses

B.3.1 Apache License, Version 2.0

Apache License

Version 2.0, January 2004

http://www.apache.org/licenses/

   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of 
this document.

"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.

"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under 
common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause 
the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or 
more of the outstanding shares, or (iii) beneficial ownership of such entity.

"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.

"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, 
documentation source, and configuration files.

"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but 
not limited to compiled object code, generated documentation, and conversions to other media types.

"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated 
by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).

"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and 
for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work 
of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or 
merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.

"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or 
additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by 
the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the 
purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor 
or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, 
and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving 
the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright 
owner as "Not a Contribution."

"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by 
Licensor and subsequently incorporated within the Work.

2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a 

perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative 
Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or 
Object form.

3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a 

perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to 
make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those 
patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination 

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.7.1

D-Link DGL-4500 - GamerLounge Xtreme N Gaming Router... User Manual preview
DGL-4500 - GamerLounge Xtreme N Gaming Router...
Brand: D-Link Pages: 108
D-Link DAP-3520 - AirPremier N Dual Band Exterior PoE Access... Command Line Interface Reference Manual preview
DAP-3520 - AirPremier N Dual Band Exterior PoE Access...
Brand: D-Link Pages: 38
D-Link DAP-3520 - AirPremier N Dual Band Exterior PoE Access... User Manual preview
DAP-3520 - AirPremier N Dual Band Exterior PoE Access...
Brand: D-Link Pages: 80
D-Link DAP-2590 - AirPremier N Dual Band PoE Access... Quick Installation Manual preview
DAP-2590 - AirPremier N Dual Band PoE Access...
Brand: D-Link Pages: 36
Nexxt Nyx300 Quick Installation Manual preview
Nyx300
Brand: Nexxt Pages: 2
Ubiquiti Edge Pro ERPro-8 Quick Start Manual preview
Edge Pro ERPro-8
Brand: Ubiquiti Pages: 20
Planet WNRT-625 User Manual preview
WNRT-625
Brand: Planet Pages: 42
Contec FXE3000 Series User Manual preview
FXE3000 Series
Brand: Contec Pages: 111
Atlantis Land A07-WA6102X-2 Specification Sheet preview
A07-WA6102X-2
Brand: Atlantis Land Pages: 2
H3C WA4320H-EI Installation Manual preview
WA4320H-EI
Brand: H3C Pages: 19
ADTRAN BLUESOCKET 3045 Quick Start preview
BLUESOCKET 3045
Brand: ADTRAN Pages: 2
D-Link DIR-2640 User Manual preview
DIR-2640
Brand: D-Link Pages: 162
Viega ManaBloc Product Instructions preview
ManaBloc
Brand: Viega Pages: 2
Icom RS-AP3 Instruction Manual preview
RS-AP3
Brand: Icom Pages: 119
DragonWave Horizon Quantum Quick Reference Manual preview
Horizon Quantum
Brand: DragonWave Pages: 2
BTI Wireless CP880-A User Manual preview
CP880-A
Brand: BTI Wireless Pages: 53
Ubiquiti Edge Point EP-R8 Quick Start Manual preview
Edge Point EP-R8
Brand: Ubiquiti Pages: 36
Novatel MiFi 2352 User Manual preview
MiFi 2352
Brand: Novatel Pages: 99

Brands by name

Popular brands

Load more brands