manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

The Motorola WiNG 5.7.1 System Reference Manual is a comprehensive guide providing detailed instructions on operating and configuring the Motorola WiNG 5.7.1 system. Discover all the necessary information in this manual, available for free download at 88.208.23.73:8080, ensuring a seamless user experience for your Motorola WiNG 5.7.1 product.

Share
Download
background image

B - 29

TERMS AND CONDITIONS

      0. Definitions.

      "This License" refers to version 3 of the GNU General Public License.

      "Copyright" also means copyright-like laws that apply to other kinds of works, such as semiconductor masks.

      "The Program" refers to any copyrightable work licensed under this License.  Each licensee is addressed as "you". "Licensees" 
and "recipients" may be individuals or organizations.

      To "modify" a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other 
than the making of an exact copy.  The resulting work is called a "modified version" of the earlier work or a work "based on" 
the earlier work.

      A "covered work" means either the unmodified Program or a work based on the Program.

      To "propagate" a work means to do anything with it that, without permission, would make you directly or secondarily liable 
for infringement under applicable copyright law, except executing it on a computer or modifying a private copy.  Propagation 
includes copying, distribution (with or without modification), making available to the public, and in some countries other 
activities as well.

      To "convey" a work means any kind of propagation that enables other parties to make or receive copies.  Mere interaction 
with a user through a computer network, with no transfer of a copy, is not conveying.

      An interactive user interface displays "Appropriate Legal Notices" to the extent that it includes a convenient and prominently 
visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work 
(except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a 
copy of this License.  If the interface presents a list of user commands or options, such as a menu, a prominent item in the list 
meets this criterion.

      1. Source Code.

      The "source code" for a work means the preferred form of the work for making modifications to it.  "Object code" means 
any non-source form of a work.

      A "Standard Interface" means an interface that either is an official standard defined by a recognized standards body, or, in 
the case o interfaces specified for a particular programming language, one that is widely used among developers working in 
that language.

      The "System Libraries" of an executable work include anything, other than the work as a whole, that (a) is included in the 
normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable 
use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to 
the public in source code form.  A "Major Component", in this context, means a major essential component (kernel, window 
system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce 
the work, or an object code interpreter used to run it.

      The "Corresponding Source" for a work in object code form means all the source code needed to generate, install, and (for 
an executable work) run the object code and to modify the work, including scripts to control those activities.  However, it does 
not include the work's System Libraries, or general-purpose tools or generally available free programs which are used 
unmodified in performing those activities but which are not part of the work.  For example, Corresponding Source includes 
interface definition files associated with source files forthe work, and the source code for shared libraries and dynamically 
linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow 
between those subprograms and other parts of the work.

      The Corresponding Source need not include anything that users can regenerate automatically from other parts of the 
Corresponding Source.

      The Corresponding Source for a work in source code form is that same work.

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.7.1

Microsemi PD-9501G/24AC User Manual preview
PD-9501G/24AC
Brand: Microsemi Pages: 2
GROM Audio GROM-BTD Installation And Operation Instruction preview
GROM-BTD
Brand: GROM Audio Pages: 4
ReadyNet LTE500 Quick Installation Manual preview
LTE500
Brand: ReadyNet Pages: 2
Vaisala VaiNet AP10 Manual preview
VaiNet AP10
Brand: Vaisala Pages: 76
MikroTik cAP lite User Manual preview
cAP lite
Brand: MikroTik Pages: 7
MOBIDATA MBD-R100H User Manual preview
MBD-R100H
Brand: MOBIDATA Pages: 30
cramZ 900-R Installation Manual preview
900-R
Brand: cramZ Pages: 20
Linksys LAPAC1750PRO User Manual preview
LAPAC1750PRO
Brand: Linksys Pages: 121
Fortinet FortiAP 112B Quick Start Manual preview
FortiAP 112B
Brand: Fortinet Pages: 24
QTech sms lite User Manual preview
sms lite
Brand: QTech Pages: 24
Monoprice MW368R User Manual preview
MW368R
Brand: Monoprice Pages: 74
Encore ENRXWI-SG User Manual preview
ENRXWI-SG
Brand: Encore Pages: 25
Encore ENHWI-N2 User Manual preview
ENHWI-N2
Brand: Encore Pages: 62
EnGenius ECB300 Quick Installation Manual preview
ECB300
Brand: EnGenius Pages: 2
EnGenius ECB150 Quick Installation Manual preview
ECB150
Brand: EnGenius Pages: 2
EnGenius ENS200 User Manual preview
ENS200
Brand: EnGenius Pages: 86
Orbitel OBT-58108 User Manual preview
OBT-58108
Brand: Orbitel Pages: 27
Cambium Networks XIRRUS XA4-240 Installation Manual preview
XIRRUS XA4-240
Brand: Cambium Networks Pages: 11

Brands by name

Popular brands

Load more brands