manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

The Motorola WiNG 5.7.1 System Reference Manual is a comprehensive guide providing detailed instructions on operating and configuring the Motorola WiNG 5.7.1 system. Discover all the necessary information in this manual, available for free download at 88.208.23.73:8080, ensuring a seamless user experience for your Motorola WiNG 5.7.1 product.

Share
Download
background image

B - 30 WiNG 5.7.1 Access Point System Reference Guide 

      2. Basic Permissions.

      All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the 
stated conditions are met.  This License explicitly affirms your unlimited permission to run the unmodified Program.  The output 
from running a covered work is covered by this License only if the output, given its content, constitutes a covered work.  This 
License acknowledges your rights of fair use or other equivalent, as provided by copyright law.

      You may make, run and propagate covered works that you do not convey, without conditions so long as your license 
otherwise remains in force.  You may convey covered works to others for the sole purpose of having them make modifications 
exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this 
License in conveying all material for which you do not control copyright.  Those thus making or running the covered works for 
you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies 
of your copyrighted material outside their relationship with you.

      Conveying under any other circumstances is permitted solely under the conditions stated below.  Sublicensing i not allowed; 
section 10 makes it unnecessary.

      3. Protecting Users' Legal Rights From Anti-Circumvention Law.

      No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations 
under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting 
circumvention of such measures.

      When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the 
extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim 
any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third 
parties' legal rights to forbid circumvention of echnological measures.

      4. Conveying Verbatim Copies.

      You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you 
conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this 
License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence 
of any warranty; and give all recipients a copy of this License along with the Program.

      You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a 
fee.

      5. Conveying Modified Source Versions.

      You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source 
code under the terms of section 4, provided that you also meet all of these conditions:

        a) The work must carry prominent notices stating that you modified it, and giving a relevant date.

        b) The work must carry prominent notices stating that it is released under this License and any conditions added under 
section

        7.  This requirement modifies the requirement in section 4 to "keep intact all notices".

        c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy.  This 
License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, 
regardless of how they are packaged.  This License gives no permission to license the work in any other way, but it does not 
invalidate such permission if you have separately received it.

        d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has 
interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so.

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.7.1

Ruijie Networks RG-MAP552(SR) series Installation And Reference Manual preview
RG-MAP552(SR) series
Brand: Ruijie Networks Pages: 19
Everest AP12I360 Installation Manual preview
AP12I360
Brand: Everest Pages: 26
Belkin F5D7132 - Wireless G Universal Range Extender/Access Point Specifications preview
F5D7132 - Wireless G Universal Range Extender/Access Point
Brand: Belkin Pages: 2
HiTi Digital 44.P30R3.MW1 User Manual preview
44.P30R3.MW1
Brand: HiTi Digital Pages: 26
Alfa Network AWPCI085P Specifications preview
AWPCI085P
Brand: Alfa Network Pages: 1
Andersson WSR 2.0 User Manual preview
WSR 2.0
Brand: Andersson Pages: 47
Bountiful BWRG1000 User Manual preview
BWRG1000
Brand: Bountiful Pages: 58
Kobian Wireless LAN Access Point User Manual preview
Wireless LAN Access Point
Brand: Kobian Pages: 35
Billion BiPAC 5400N R2 Quick Start Manual preview
BiPAC 5400N R2
Brand: Billion Pages: 7
iBall Baton iB-WRB150NE User Manual preview
iB-WRB150NE
Brand: iBall Baton Pages: 62
DQ Technology M625N User Manual preview
M625N
Brand: DQ Technology Pages: 43
Comcast MiFi 2200 Device User Manual preview
MiFi 2200
Brand: Comcast Pages: 16
AmbiCom WL22-AP Quick Installation Manual preview
WL22-AP
Brand: AmbiCom Pages: 6
PHICOMM FWR-734N User Manual preview
FWR-734N
Brand: PHICOMM Pages: 53
HPE Aruba AP-303P Product End-Of-Life Disassembly Instructions preview
Aruba AP-303P
Brand: HPE Pages: 3
HPE OfficeConnect OC20 Installation Manual preview
OfficeConnect OC20
Brand: HPE Pages: 4
HPE Aruba AP-344 Product End-Of-Life Disassembly Instructions preview
Aruba AP-344
Brand: HPE Pages: 4
Ubiquiti UniFi UAP-AC-IW Quick Start Manual preview
UniFi UAP-AC-IW
Brand: Ubiquiti Pages: 24

Brands by name

Popular brands

Load more brands