manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

The Motorola WiNG 5.7.1 System Reference Manual is a comprehensive guide providing detailed instructions on operating and configuring the Motorola WiNG 5.7.1 system. Discover all the necessary information in this manual, available for free download at 88.208.23.73:8080, ensuring a seamless user experience for your Motorola WiNG 5.7.1 product.

Share
Download
background image

B - 40 WiNG 5.7.1 Access Point System Reference Guide 

machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium 
customarily used for software interchange.

If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access 
to copy the source code from the same place satisfies the requirement to distribute the source code, even though third 
parties are not compelled to copy the source along with the object code.

5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being 

compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the 
Library, and therefore falls outside the scope of this License.

However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library 
(because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered 
by this License. Section 6 states terms for distribution of such executables.

When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work 
may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if 
the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely 
defined by law.

If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small 
inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally 
a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.)

Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of 
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the 
Library itself.

6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to 

produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the 
terms permit modification of the work for the customer's own use and reverse engineering for debugging such 
modifications.

You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are 
covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you 
must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this 
License. Also, you must do one of these things:

a. Accompany the work with the complete corresponding machine-readable source code for the Library including whatever 

changes were used in the work (which must be distributed under     Sections 1 and 2 above); and, if the work is an 
executable linked     with the Library, with the complete machine-readable "work that uses the Library", as object code 
and/or source code, so that the     user can modify the Library and then relink to produce a modified executable 
containing the modified Library.  (It is understood that the user who changes the contents of definitions files in the 
Library will not necessarily be able to recompile the application to use the modified definitions.)

b.  Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified 

in Subsection 6a, above, for a charge no more than the cost of performing this distribution.

c. If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy 

the above specified materials from the same place.

d. Verify that the user has already received a copy of these materials or that you have already sent this user a copy.

For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed 
for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include 
anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so 
on) of the operating system on which the executable runs, unless that component itself accompanies the executable.

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.7.1

Extreme Networks EN-SLX 9640-24S-12C Installation Manual preview
EN-SLX 9640-24S-12C
Brand: Extreme Networks Pages: 113
TP-Link TL-WR541G - Wireless Router User Manual preview
TL-WR541G - Wireless Router
Brand: TP-Link Pages: 91
Watchguard WGA15731 Hardware Manual preview
WGA15731
Brand: Watchguard Pages: 28
NETGEAR Nighthawk MK73 Quick Start preview
Nighthawk MK73
Brand: NETGEAR Pages: 2
Sena Parani MSP1000 User Manual preview
Parani MSP1000
Brand: Sena Pages: 82
ORiNG IGAP-420 series User Manual preview
IGAP-420 series
Brand: ORiNG Pages: 56
ORiNG IAP-6701-WG+ User Manual preview
IAP-6701-WG+
Brand: ORiNG Pages: 58
Conrad MZK-W04NU Operating Instructions Manual preview
MZK-W04NU
Brand: Conrad Pages: 76
LG Innotek TWFM-L006D User Manual preview
TWFM-L006D
Brand: LG Innotek Pages: 14
Nortel AS-1200-ABG-EXT Quick Installation Manual preview
AS-1200-ABG-EXT
Brand: Nortel Pages: 28
LB-Link 4G LTE User Manual preview
4G LTE
Brand: LB-Link Pages: 12
J Plus Juni JLT622P User Manual preview
Juni JLT622P
Brand: J Plus Pages: 88
Pentagram Cerberus [P 6367] Installation And Operation Manual preview
Cerberus [P 6367]
Brand: Pentagram Pages: 48
Apreto Networks PacketMAX 5000 Installation And Operaion Manual preview
PacketMAX 5000
Brand: Apreto Networks Pages: 150
Sapido BR476n Quick Installation Manual preview
BR476n
Brand: Sapido Pages: 24
Digitus DN-7018 User Manual preview
DN-7018
Brand: Digitus Pages: 52
Ubiquiti Rocket 5AC PTP Quick Start Manual preview
Rocket 5AC PTP
Brand: Ubiquiti Pages: 12
SAGEMCOM F@st 5260 User Manual preview
F@st 5260
Brand: SAGEMCOM Pages: 56

Brands by name

Popular brands

Load more brands