manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

The Motorola WiNG 5.7.1 System Reference Manual is a comprehensive guide providing detailed instructions on operating and configuring the Motorola WiNG 5.7.1 system. Discover all the necessary information in this manual, available for free download at 88.208.23.73:8080, ensuring a seamless user experience for your Motorola WiNG 5.7.1 product.

Share
Download
background image

B - 49

A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application 
programs (which use some of those functions and data) to form executables.

The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based 
on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library 
or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, 
translation is included without limitation in the term "modification".)

"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source 
code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used 
to control compilation and installation of the library.

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act 
of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute 
a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what 
the Library does and what the program that uses the Library does.

1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, 

provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of 
warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of 
this License along with the Library.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in 
exchange for a fee.

2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy 

and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these 
conditions:

a. The modified work must itself be a software library.

b. You must cause the files modified to carry prominent notices stating that you changed the files and the date of any 

change.

c. You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.

d. If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that 

uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort 
to ensure that, in the event an application does not supply such function or table, the facility still operates, and 
performs whatever part of its purpose remains meaningful.

(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent 
of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this 
function must be optional: if the application does not supply it, the square root function must still compute square 
roots.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the 
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, 
do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as 
part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, 
whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote 
it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent 
is to exercise the right to control the distribution of derivative or collective works based on the Library.

In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) 
on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.7.1

Hirschmann BAT54-F User Manual preview
BAT54-F
Brand: Hirschmann Pages: 42
Ubiquiti UniFi UAP-AC-LITE Quick Start Manual preview
UniFi UAP-AC-LITE
Brand: Ubiquiti Pages: 28
Mach Power WL-ICNAP24-074 User Manual preview
WL-ICNAP24-074
Brand: Mach Power Pages: 24
Buffalo Tech Nfiniti Airstation WHR-G300N User Manual preview
Nfiniti Airstation WHR-G300N
Brand: Buffalo Tech Pages: 48
Arista C-120 Quick Start Manual preview
C-120
Brand: Arista Pages: 14
NETGEAR WNR2000V3 Installation Manual preview
WNR2000V3
Brand: NETGEAR Pages: 2
NETGEAR WNR612v2 - Wireless-N 150 Router User Manual preview
WNR612v2 - Wireless-N 150 Router
Brand: NETGEAR Pages: 96
NETGEAR WNDR3700 - RangeMax Dual Band Wireless-N Gigabit Router Wireless Datasheet preview
WNDR3700 - RangeMax Dual Band Wireless-N Gigabit Router Wireless
Brand: NETGEAR Pages: 2
NETGEAR WGU624 Setup Manual preview
WGU624
Brand: NETGEAR Pages: 2
NETGEAR Wireless Router Setup Manual preview
Wireless Router
Brand: NETGEAR Pages: 74
NETGEAR WGR614v10 Reference Manual preview
WGR614v10
Brand: NETGEAR Pages: 122
NETGEAR R6900 User Manual preview
R6900
Brand: NETGEAR Pages: 249
NETGEAR Nighthawk C6900 User Manual preview
Nighthawk C6900
Brand: NETGEAR Pages: 94
NETGEAR MR1100ATT Installation Manual preview
MR1100ATT
Brand: NETGEAR Pages: 2
NETGEAR AirCard 797S User Manual preview
AirCard 797S
Brand: NETGEAR Pages: 90
NETGEAR AirCard 790 User Manual preview
AirCard 790
Brand: NETGEAR Pages: 113
NETGEAR 762S AirCard User Manual preview
762S AirCard
Brand: NETGEAR Pages: 74
NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual preview
WG302 - 802.11g ProSafe Wireless Access Point
Brand: NETGEAR Pages: 128

Brands by name

Popular brands

Load more brands