manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

The Motorola WiNG 5.7.1 System Reference Manual is a comprehensive guide providing detailed instructions on operating and configuring the Motorola WiNG 5.7.1 system. Discover all the necessary information in this manual, available for free download at 88.208.23.73:8080, ensuring a seamless user experience for your Motorola WiNG 5.7.1 product.

Share
Download
background image

B - 57

    10.3. Modified Versions

If you create software not governed by this License, and you want to create a new license for such software, you may create 
and use a modified version of this License if you rename the license and remove any references to the name of the license 
steward (except to note that such modified license differs from this License).

    10.4. Distributing Source Code Form that is Incompatible With Secondary Licenses

If You choose to distribute Source Code Form that is Incompatible With Secondary Licenses under the terms of this version of 
the License, the notice described in Exhibit B of this License must be attached.

    Exhibit A - Source Code Form License Notice

This Source Code Form is subject to the terms of the Mozilla Public License, v. 2.0. If a copy of the MPL was not distributed 
with this file, You can obtain one at http://mozilla.org/MPL/2.0/. You may add additional accurate notices of copyright 
ownership.

Exhibit B - Incompatible With Secondary Licenses Notice

This Source Code Form is Incompatible With Secondary Licenses, as defined by the Mozilla Public License, v. 2.0.

B.3.15 The Open LDAP Public License

The OpenLDAP Public License

      Version 2.8, 17 August 2003

Redistribution and use of this software and associated documentation ("Software"), with or without modification, are permitted 
provided that the following conditions are met:

1. Redistributions in source form must retain copyright statements and notices,

2. Redistributions in binary form must reproduce applicable copyright statements and notices, this list of conditions, and the 
following disclaimer in the documentation and/or other materials provided with the distribution, and

3. Redistributions must contain a verbatim copy of this document.

The OpenLDAP Foundation may revise this license from time to time. Each revision is distinguished by a version number.  You 
may use this Software under terms of this license revision or under the terms of any subsequent revision of the license.

THIS SOFTWARE IS PROVIDED BY THE OPENLDAP FOUNDATION AND ITS CONTRIBUTORS ``AS IS'' AND ANY EXPRESSED OR 
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OPENLDAP FOUNDATION, ITS CONTRIBUTORS, 
OR THE AUTHOR(S) OR OWNER(S) OF THE SOFTWARE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY 
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The names of the authors and copyright holders must not be used in advertising or otherwise to promote the sale, use or other 
dealing in this Software without specific, written prior permission.  Title to copyright in this Software shall at all times remain 
with copyright holders.

OpenLDAP is a registered trademark of the OpenLDAP Foundation.

Copyright 1999-2003 The OpenLDAP Foundation, Redwood City, California, USA.  All Rights Reserved.  Permission to copy and 
distribute verbatim copies of this document is granted..

B.3.16 OpenSSL License

    OpenSSL License

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.7.1

Raymarine Base Station Installation And Commissioning Manual preview
Base Station
Brand: Raymarine Pages: 20
Sercomm IP802SM V2 Quick Start Manual preview
IP802SM V2
Brand: Sercomm Pages: 76
Rawafed Libya 300 Mbps User Manual preview
300 Mbps
Brand: Rawafed Libya Pages: 22
Teldat Connect-4GE Manual preview
Connect-4GE
Brand: Teldat Pages: 24
Emka Electronics 3000-U981-02 User Manual preview
3000-U981-02
Brand: Emka Electronics Pages: 7
Z-Com XG-1020 User Manual preview
XG-1020
Brand: Z-Com Pages: 38
Medialink MLWR-AC1200 User Manual preview
MLWR-AC1200
Brand: Medialink Pages: 105
Bountiful BWAPG1000 Quick Start Manual preview
BWAPG1000
Brand: Bountiful Pages: 1
Kobian Wireless LAN Access Point User Manual preview
Wireless LAN Access Point
Brand: Kobian Pages: 35
Streamax Easy Check User Manual preview
Easy Check
Brand: Streamax Pages: 23
Guepard Networks GC1200ac Manual preview
GC1200ac
Brand: Guepard Networks Pages: 29
Edimax Pro AP 1 How To Set Up preview
Pro AP 1
Brand: Edimax Pages: 3
Allnet Powerline 802.11g Wireless Access Point User Manual preview
Powerline 802.11g Wireless Access Point
Brand: Allnet Pages: 6
Allnet ALL0237R User Manual preview
ALL0237R
Brand: Allnet Pages: 27
Allnet ALL-WAP0358N Quick Installation Manual preview
ALL-WAP0358N
Brand: Allnet Pages: 25
Allnet ALL-WAP0558N Quick Installation Manual preview
ALL-WAP0558N
Brand: Allnet Pages: 25
Allnet ALL-WAP0324N Quick Installation Manual preview
ALL-WAP0324N
Brand: Allnet Pages: 34
Allnet ALL0258 User Manual preview
ALL0258
Brand: Allnet Pages: 65

Brands by name

Popular brands

Load more brands