manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

The Motorola WiNG 5.7.1 System Reference Manual is a comprehensive guide providing detailed instructions on operating and configuring the Motorola WiNG 5.7.1 system. Discover all the necessary information in this manual, available for free download at 88.208.23.73:8080, ensuring a seamless user experience for your Motorola WiNG 5.7.1 product.

Share
Download
background image

5 - 75

16. Define the following

 Rate Limit

 settings for the L2TP tunnel configuration. Rate limiting manages the maximum rate sent 

to or received from L2TPv3 tunnel members.

Establishment Criteria

Configure establishment criteria for creating a tunnel between the device and the NOC. 
This criteria ensures only one tunnel is created between two sites where the tunnel is 
established between the vrrp-master/cluster master/rf-domain manager at the remote 
site and the controller at the NOC. The tunnel is created based on the role of the remote 
peer.

•

always –

 The tunnel is always created irrespective of the role of the local device.

•

vrrp-master

 – The tunnel is only created when the local device is a VRRP master.

•

cluster-master

 – The tunnel is only created when the local device is a cluster master.

•

rf-domain-manager

 – The tunnel is only created when the local device is a RF-Domain 

manager.

In all the above cases, if the local device goes offline for any reason, the tunnel is brought 
down.

VRRP Group

This field is enabled only when the 

Establishment Criteria

 is set to 

vrrp-master

. Use the 

spinner to select the VRRP group.

Critical Resource

Enter the critical resources required for creating and maintaining a L2TPV3 tunnel. A 
tunnel is only established when all critical resources for the tunnel to be operational are 
available at the time when the tunnel is created. If any one of the listed critical resources 
goes down, the tunnel is disabled.

When a tunnel is established, the listed critical resources are checked for availability. 
Tunnel establishment is started if the critical resources are available. Similarly, for 
incoming tunnel termination requests, listed critical resources are checked and tunnel 
terminations are only allowed when the critical resources are available.

For more information on managing critical resources, see 

Profile Critical Resources on 

page 5-162

.

Session Name

Use the drop-down menu to select the tunnel session that will have the direction, burst 
size and traffic rate settings applied.

Direction 

Select the direction for L2TPv3 tunnel traffic rate limiting. 

Egress 

traffic is outbound 

L2TPv3 tunnel data coming to the controller, service platform or access point. 

Ingress

 

traffic is inbound L2TPv3 tunnel data coming to the controller, service platform or access 
point.

Maximum Burst Size

Set the maximum burst size for egress or ingress traffic rate limiting (depending on which 
direction is selected) on a L2TPv3 tunnel. Set a maximum burst size between 2 - 1024 
kbytes. The smaller the burst, the less likely the upstream packet transmission will result 
in congestion for L2TPv3 tunnel traffic. The default setting is 320 bytes.

Rate

Set the data rate (from 50 - 1,000,000 kbps) for egress or ingress traffic rate limiting 
(depending on which direction is selected) for an L2TPv3 tunnel. The default setting is 
5000 kbps.

Background

Set the random early detection threshold in % for background traffic. Set a value from 1 
- 100%. The default is 50%.

Best-effort

Set the random early detection threshold in % for best-effort traffic. Set a value from 1 - 
100%. The default is 50%.

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.7.1

2N EasyRoute Quick Setup Manual preview
EasyRoute
Brand: 2N Pages: 3
Cerio WP-300N Quick Start Manual preview
WP-300N
Brand: Cerio Pages: 13
P-Com AirPro Gold Hardware Installation Manual preview
AirPro Gold
Brand: P-Com Pages: 54
NETGEAR AirCard 815S User Manual preview
AirCard 815S
Brand: NETGEAR Pages: 98
Foxconn J20H076 User Manual preview
J20H076
Brand: Foxconn Pages: 28
Arris RUCKUS ZoneDirector 1200 Quick Setup Manual preview
RUCKUS ZoneDirector 1200
Brand: Arris Pages: 2
Qcom LR802UKN3 User Manual preview
LR802UKN3
Brand: Qcom Pages: 29
Youwon ZF01-C Operation Manual preview
ZF01-C
Brand: Youwon Pages: 4
HAN AP301 Installation Manual preview
AP301
Brand: HAN Pages: 2
EnGenius ECB3500 User Manual preview
ECB3500
Brand: EnGenius Pages: 117
D-Link DSL-2730R Quick Installation Manual preview
DSL-2730R
Brand: D-Link Pages: 16
D-Link DSL Series Configuration Manual preview
DSL Series
Brand: D-Link Pages: 10
D-Link DIR-905L Quick Installation Manual preview
DIR-905L
Brand: D-Link Pages: 32
D-Link dlinkgo GO-RTW-N300 Brochure & Specs preview
dlinkgo GO-RTW-N300
Brand: D-Link Pages: 3
D-Link DSR-1000AC Quick Installation Manual preview
DSR-1000AC
Brand: D-Link Pages: 72
D-Link DIR-900L Quick Installation Manual preview
DIR-900L
Brand: D-Link Pages: 32
D-Link DIR-LX1870 Quick Installation Manual preview
DIR-LX1870
Brand: D-Link Pages: 2
D-Link DSL-2740R User Manual preview
DSL-2740R
Brand: D-Link Pages: 73

Brands by name

Popular brands

Load more brands