5 - 304 WiNG 5.7.1 Access Point System Reference Guide
46. Select
OK
to save the changes to the IPv6 RA prefix configuration. Select
Exit
to close the screen without saving the
updates.
47. Select the
OK
button to save the changes and overrides to the basic configuration. Select
Reset
to revert to the last saved
configuration.
48. Select the
Security
tab.
Figure 5-200
Device Overrides - Network - OSPF Virtual Interface - Security screen
Valid Lifetime Time
If the lifetime type is set to
decrementing
, set the time for the prefix's end of validity. Use the
spinner controls to set the time in hours and minutes. Use the
AM PM
radio buttons to set
the appropriate hour.
Preferred Lifetime
Type
Set the administrator preferred lifetime for the prefix's validity. Options include
External
(fixed), decrementing
and
infinite
. If set to External (fixed), just the
Valid Lifetime Sec
setting
is enabled to define the exact time interval for prefix validity. If set to decrementing, use the
lifetime date and time settings to refine the prefix expiry period. If the value is set for infinite,
no additional date or time settings are required for the prefix and the prefix will not expire.
The default setting is External (fixed).
Preferred Lifetime
Sec
If the administrator preferred lifetime type is set to
External (fixed)
, set the
Seconds, Minutes,
Hours
or
Days
value used to measurement criteria for the prefix's expiration. 30 days, 0 hours,
0 minutes and 0 seconds is the default lifetime.
Preferred Lifetime
Date
If the administrator preferred lifetime type is set to
decrementing,
set the date in MM/DD/
YYYY format for the expiration of the prefix.
Preferred Lifetime
Time
If the preferred lifetime type is set to
decrementing,
set the time for the prefix's validity. Use
the spinner controls to set the time in hours and minutes. Use the
AM PM
radio buttons to
set the appropriate hour.
Autoconfig
Autoconfiguration includes generating a link-local address, global addresses via stateless
address autoconfiguration and duplicate address detection to verify the uniqueness of the
addresses on a link. This setting is enabled by default.
On Link
Select this option to keep the IPv6 RA prefix on the local link. The default setting is enabled.
Summary of Contents for WiNG 5.7.1
