manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

The Motorola WiNG 5.7.1 System Reference Manual is a comprehensive guide providing detailed instructions on operating and configuring the Motorola WiNG 5.7.1 system. Discover all the necessary information in this manual, available for free download at 88.208.23.73:8080, ensuring a seamless user experience for your Motorola WiNG 5.7.1 product.

Share
Download
background image

6 - 71

6. Set the following 

Voice Access

 settings for the radio QoS policy:

7. Set the following 

Normal (Best Effort) Access

 settings for the radio QoS policy:

8. Set the following 

Video Access

 settings for the radio QoS policy:

Transmit Ops 

Use the slider to set the maximum duration a device can transmit after obtaining a 
transmit opportunity. When resources are shared between a 

Voice over IP

 (VoIP) call and 

a low priority file transfer, bandwidth is normally exploited by the file transfer, thus 
reducing call quality or even causing the call to disconnect. With voice QoS, a VoIP call (a 
real-time session), receives priority, maintaining a high level of voice quality. For higher-
priority traffic categories (like voice), the 

Transmit Ops

 value should be set to a low 

number. The default value is 47.

AIFSN

Set the current AIFSN value from 1 - 15. Higher-priority traffic voice categories should 
have lower AIFSNs than lower-priority traffic categories. This will cause lower-priority 
traffic to wait longer before attempting access. The default value is 1.

ECW Min

ECW Min

 is combined with 

ECW Max

 to create a contention value in the form of a 

numerical range. From this range, a random number is selected for the back off 
mechanism. Lower values are used for higher priority traffic. The available range is from 
0 - 15. The default value is 2.

ECW Max

ECW Max

 is combined with 

ECW Min

 to create a contention value in the form of a 

numerical range. From this range, a random number is selected for the back off 
mechanism. Lower values are used for higher priority traffic. The available range is from 
0 - 15. The default value is 3.

Transmit Ops 

Use the slider to set the maximum duration a device can transmit after obtaining a 
transmit opportunity. For higher-priority traffic categories, this value should be set to a low 
number. The default value is 0.

AIFSN

Set the current AIFSN from 1 - 15. Higher-priority traffic voice categories should have 
lower AIFSNs than lower-priority traffic categories. This will cause lower-priority traffic to 
wait longer before attempting access. The default value is 3.

ECW Min

ECW Min

 is combined with 

ECW Max

 to create a contention value in the form of a 

numerical range. From this range, a random number is selected for the back off 
mechanism. Higher values are used for lower priority traffic (like normal). The available 
range is from 0-15. The default value is 4.

ECW Max

ECW Max

 is combined with 

ECW Min

 to create a contention value in the form of a 

numerical range. From this range, a random number is selected for the back off 
mechanism. Higher values are used for lower priority traffic (like normal). The available 
range is from 0-15. The default value is 6.

Transmit Ops 

Use the spinner control to set the maximum duration a radio can transmit after obtaining 
a transmit opportunity. For higher-priority traffic categories (like video), this value should 
be set to a low number. The default value is 94.

AIFSN

Set the current AIFSN from 1 - 15. Higher-priority traffic video categories should have 
lower AIFSNs than lower-priority traffic categories. This will cause lower-priority traffic to 
wait longer before attempting access. The default value is 1.

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.7.1

Ebyte E30-400M30S User Manual preview
E30-400M30S
Brand: Ebyte Pages: 11
Inseego 5G MiFi M1100 User Manual preview
5G MiFi M1100
Brand: Inseego Pages: 68
MikroTik RBwAPR-2nD&R11e-LR8 Quick Manual preview
RBwAPR-2nD&R11e-LR8
Brand: MikroTik Pages: 21
PROLiNK PRT7010L Quick Installation Manual preview
PRT7010L
Brand: PROLiNK Pages: 28
Pakedge WA-2200-C-1 Quick Start Manual preview
WA-2200-C-1
Brand: Pakedge Pages: 6
3Com 3CRWX315075A - Wireless LAN Managed Access Point... Quick Start Manual preview
3CRWX315075A - Wireless LAN Managed Access Point...
Brand: 3Com Pages: 16
GSD WC5FM2601F User Manual preview
WC5FM2601F
Brand: GSD Pages: 5
D-Link DWR-953V2 Quick Installation Manual preview
DWR-953V2
Brand: D-Link Pages: 64
D-Link DWR-910 Technical Support Setup Procedure preview
DWR-910
Brand: D-Link Pages: 3
D-Link DWR-910 Quick Installation Manual preview
DWR-910
Brand: D-Link Pages: 4
D-Link DWM-315 Quick Installation Manual preview
DWM-315
Brand: D-Link Pages: 36
D-Link DWR-925 Quick Installation Manual preview
DWR-925
Brand: D-Link Pages: 16
D-Link DWR-732 Quick Installation Manual preview
DWR-732
Brand: D-Link Pages: 28
D-Link DWR-330 User Manual preview
DWR-330
Brand: D-Link Pages: 16
D-Link N 150 User Manual preview
N 150
Brand: D-Link Pages: 65
D-Link DWR-510 Technical Specifications preview
DWR-510
Brand: D-Link Pages: 2
D-Link DWR-M920 Quick Installation Manual preview
DWR-M920
Brand: D-Link Pages: 5
D-Link DWR-111 User Manual preview
DWR-111
Brand: D-Link Pages: 82

Brands by name

Popular brands

Load more brands