manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

The Motorola WiNG 5.7.1 System Reference Manual is a comprehensive guide providing detailed instructions on operating and configuring the Motorola WiNG 5.7.1 system. Discover all the necessary information in this manual, available for free download at 88.208.23.73:8080, ensuring a seamless user experience for your Motorola WiNG 5.7.1 product.

Share
Download
background image

7 - 30 WiNG 5.7.1 Access Point System Reference Guide 

10. Set the 

Authorization Server Preference

 to select the server to receive authorization requests. The default is 

authenticated-server-host. If selecting 

None, authenticated-server-number, authorized-server-host

, or 

a

uthorized-server-number

, select 

+ Add Row

 to populate the table with required parameters.

Set the following 

Authorization Server Details

:

11. Click 

OK 

to save the changes, 

Reset

 to revert to the last saved configuration or 

Exit

 to close the screen.

12. Set the 

Accounting Server Preference

 to select the authentication server to receive accounting requests. The default 

is authenticated-server-host. If selecting

 None, authenticated-server-number, authorized-server-host

, or 

authorized-server-number

, select 

+ Add Row

.

13. Set the following 

Accounting Server

 Details:

Server Id

Lists the numerical server index (1-2) for each authentication server when added to the list 
available to the controller, service platform or access point.

Host

Displays the IP address or hostname set for the AAA TACACS authentication server. A 
valid hostname cannot contain an underscore.

Port

Displays the port the TACACS authentication server listens to traffic. The port range is 1 - 
65,535. The default port is 49.

Secret

Specify (and confirm) the secret (password) used for authentication between the selected 
AAA TACACS server and the controller, service platform or access point. By default the 
secret is displayed as asterisks. To see the secret being entered, select the 

Show

 option.

Request Attempts

Displays the number of connection attempts before the controller, service platform or 
access point times out of the authentication session. The available range is from 1 - 10. 
The default is 3.

Request Timeout

Specify the time for the re-transmission of request packets after an unsuccessful attempt. 
The default is 3 seconds. If the set time is exceeded, the authentication session is 
terminated.

Retry Timeout Factor

Set the scaling of retransmission attempts from 50 - 200 seconds. The timeout at each 
attempt is the function of the retry timeout factor and the attempt number. 100 (the default 
value) implies a constant timeout on each retry. Smaller values indicate more aggressive 
(shorter) timeouts. Larger numbers define more conservative (larger) timeouts on each 
successive attempt. The default is 100.

Server Id

Lists the numerical server index (1-2) for each authentication server when added to the list 
available to the controller, service platform or access point.

Host

Displays the IP address or hostname set for the AAA TACACS authentication server. A 
valid hostname cannot contain an underscore.

Port

Displays the port the TACACS authentication server listens to traffic. The port range is 1 - 
65,535. The default port is 49.

Secret

Specify (and confirm) the secret (password) used for authentication between the selected 
AAA TACACS server and the controller, service platform or access point. By default the 
secret is displayed as asterisks. To see the secret being entered, select the 

Show

 option.

Request Attempts

Displays the number of connection attempts before the controller, service platform or 
access point times out of the authentication session. The available range is from 1 - 10. 
The default is 3.

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.7.1

D-Link DWL-7130AP - xStack - Wireless Access Point Overview preview
DWL-7130AP - xStack - Wireless Access Point
Brand: D-Link Pages: 4
ICP DAS USA WF-2000 Series Faq preview
WF-2000 Series
Brand: ICP DAS USA Pages: 8
MicroNet SP918GK User Manual preview
SP918GK
Brand: MicroNet Pages: 46
Widelink ezWave WAP-1100 Series User Manual preview
ezWave WAP-1100 Series
Brand: Widelink Pages: 50
BenQ DEY21 User Manual preview
DEY21
Brand: BenQ Pages: 15
Alfa Network AWPCI085P Specifications preview
AWPCI085P
Brand: Alfa Network Pages: 1
Last Mile Gear Cyclone 900 User Manual preview
Cyclone 900
Brand: Last Mile Gear Pages: 19
Rugged Radios SS-WM1 User Manual preview
SS-WM1
Brand: Rugged Radios Pages: 2
Ruckus Wireless ZoneFlex R600 Quick Setup Manual preview
ZoneFlex R600
Brand: Ruckus Wireless Pages: 4
Ruckus Wireless ZoneFlex 7352 Quick Setup Manual preview
ZoneFlex 7352
Brand: Ruckus Wireless Pages: 12
RTS ROAMEO Quick Start Manual preview
ROAMEO
Brand: RTS Pages: 2
EnGenius M36 Datasheet preview
M36
Brand: EnGenius Pages: 6
EnGenius EMD2 User Manual preview
EMD2
Brand: EnGenius Pages: 60
EnGenius EMD1AP User Manual preview
EMD1AP
Brand: EnGenius Pages: 62
EnGenius ENH900EXT User Manual preview
ENH900EXT
Brand: EnGenius Pages: 76
EnGenius EOC2611P User Manual preview
EOC2611P
Brand: EnGenius Pages: 89
EnGenius ENH220EXT Quick Installation Manual preview
ENH220EXT
Brand: EnGenius Pages: 4
EnGenius ENH200 Specifications preview
ENH200
Brand: EnGenius Pages: 5

Brands by name

Popular brands

Load more brands