manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

The Motorola WiNG 5.7.1 System Reference Manual is a comprehensive guide providing detailed instructions on operating and configuring the Motorola WiNG 5.7.1 system. Discover all the necessary information in this manual, available for free download at 88.208.23.73:8080, ensuring a seamless user experience for your Motorola WiNG 5.7.1 product.

Share
Download
background image

   13 - 43

The 

Neighbors 

tab displays the following:

Timeout

The timeout interval in seconds. The interpretation this value will vary depending on the 
value of the state. If the state is 

Init

 or In 

Progress

, the timeout duration has no 

significance. If the state is 

Enabled

, the timeout duration indicates the amount of time left 

before the security validity check is initiated. If the state is 

Failed

, the timeout duration is 

the amount of time after which the system will retry.

Mesh Point Name

Displays the name of each configured mesh point in the RF Domain.

Destination Addr

The destination is the endpoint of mesh path. It may be a MAC address or a mesh point ID.

Neighbor MP ID

The MAC Address that the device uses to define the mesh point in the device that the 
neighbor is a part of. It is used to distinguish the device that is the neighbor.

Neighbor IFID

The MAC Address used by the interface on the neighbor device to communicate with this 
device. This may define a particular radio or Ethernet port that communicates with this 
device over the mesh.

Root MP ID

The mesh point ID of the neighbor's root mesh point.

Is Root

A root mesh point is defined as a mesh point that is connected to the WAN and provides 
a wired backhaul to the network. 

Yes

 if the mesh point that is the neighbor is a root mesh 

point or 

No

 if the mesh point that is the neighbor is not a root mesh point.

Mobility

Displays whether the mesh point is a mobile or static node. Displays 

True

 when the device 

is mobile and 

False

 when the device is not mobile.

Radio Interface

This indicates the interface that is used by the device to communicate with this neighbor. 
The values are 

2.4

 and 

5.0

, indicating the frequency of the radio that is used to 

communicate with the neighbor.

Mesh Root Hops

The number of devices between the neighbor and its root mesh point. If the neighbor is a 
root mesh point, this value will be 

0

. If the neighbor is not a root mesh point but it has a 

neighbor that is a root mesh point, this value will be 

1

. Each mesh point between the 

neighbor and its root mesh point is counted as 1 hop.

Resourced

Displays whether the mesh point has been resourced or not. The Mesh Connex neighbor 
table can contain more neighbors than the AP supports. If the neighbor is resourced, it will 
take away a one of the resources for a wireless client device to be used for meshing. 
Displays 

True

 when the device is resourced and 

False

 when the device is not.

Link Quality

An abstract value depicting the quality of the mesh link between the device and the 
neighbor. The range is from 0 (weakest) to 100 (strongest).

Link Metric

This value shows the computed path metric from the device to the neighbor mesh point 
using this interface. The lower the number the better the possibility that the neighbor will 
be chosen as the path to the root mesh point.

Root Metric

The computed path metric between the neighbor and their root mesh point.

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.7.1

D-Link DWR-116 Quick Setup Manual preview
DWR-116
Brand: D-Link Pages: 8
D-Link DWR-113 Manual preview
DWR-113
Brand: D-Link Pages: 47
D-Link DSR-500AC Quick Installation Manual preview
DSR-500AC
Brand: D-Link Pages: 72
Lancom DSL Series Manual preview
DSL Series
Brand: Lancom Pages: 101
D-Link DIR-451 - 3G Mobile Router User Manual preview
DIR-451 - 3G Mobile Router
Brand: D-Link Pages: 83
D-Link DWL-2100AP - AirPlus Xtreme G Technical Specifications preview
DWL-2100AP - AirPlus Xtreme G
Brand: D-Link Pages: 2
D-Link DI-714 Quick Install Manual preview
DI-714
Brand: D-Link Pages: 8
D-Link DI-711 - Gateway Quick Install Manual preview
DI-711 - Gateway
Brand: D-Link Pages: 7
D-Link DI-784 Manual preview
DI-784
Brand: D-Link Pages: 100
D-Link DI-514 - Wireless Router Owner'S Manual preview
DI-514 - Wireless Router
Brand: D-Link Pages: 62
D-Link DIR-L1900 User Manual preview
DIR-L1900
Brand: D-Link Pages: 20
D-Link DWP-1010 User Manual preview
DWP-1010
Brand: D-Link Pages: 47
Tenda TWL54A User Manual preview
TWL54A
Brand: Tenda Pages: 34
H3C WA6020 Installation Manual preview
WA6020
Brand: H3C Pages: 27
Z-Com ZAC-1023-5 User Manual preview
ZAC-1023-5
Brand: Z-Com Pages: 66
Acksys RailBox 11ac/WiFi 5 Quick Installation Manual preview
RailBox 11ac/WiFi 5
Brand: Acksys Pages: 36
Ebyte E220-900MM22S Manual preview
E220-900MM22S
Brand: Ebyte Pages: 14
Gigawave G-AP-LITE-48 Instructions preview
G-AP-LITE-48
Brand: Gigawave Pages: 4

Brands by name

Popular brands

Load more brands