manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

The Motorola WiNG 5.7.1 System Reference Manual is a comprehensive guide providing detailed instructions on operating and configuring the Motorola WiNG 5.7.1 system. Discover all the necessary information in this manual, available for free download at 88.208.23.73:8080, ensuring a seamless user experience for your Motorola WiNG 5.7.1 product.

Share
Download
background image

B - 18 WiNG 5.7.1 Access Point System Reference Guide 

loginrec is written primarily by Andre Lucas, atomicio.c by Theo de Raadt.

strlcat() is (c) Todd C. Miller

=====

Import code in keyimport.c is modified from PuTTY's import.c, licensed as follows:

PuTTY is copyright 1997-2003 Simon Tatham.

Portions copyright Robert de Bath, Joris van Rantwijk, Delian Delchev, Andreas Schultz, Jeroen Massar, Wez Furlong, Nicolas 
Barry, Justin Bradford, and CORE SDI S.A.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation 
files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, 
merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is 
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT 
LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN 
NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE 
USE OR OTHER DEALINGS IN THE SOFTWARE.

-------------------------------------------------------------------------------

B.3.5 GNU General Public License, version 2

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone 
is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General 
Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for 
all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program 
whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public 
License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make 
sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive 
source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that 
you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the 
rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights 
that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so 
they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission 
to copy, distribute and/or modify the software.

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.7.1

D-Link Wireless VPN Router DI-824VUP User Manual preview
Wireless VPN Router DI-824VUP
Brand: D-Link Pages: 157
H3C MSR810 Hardware Information preview
MSR810
Brand: H3C Pages: 37
H3C MSR 800 Installation Manual preview
MSR 800
Brand: H3C Pages: 41
3Com AirConnect 9550 Quick Start Manual preview
AirConnect 9550
Brand: 3Com Pages: 68
LevelOne PLI-3411 Quick Installation Manual preview
PLI-3411
Brand: LevelOne Pages: 33
IgniteNet AC866 Quick Start Manual preview
AC866
Brand: IgniteNet Pages: 63
EnGenius EOC5510 Quick Start Manual preview
EOC5510
Brand: EnGenius Pages: 2
8 Level WRP-300 Quick Installation Manual preview
WRP-300
Brand: 8 Level Pages: 16
Linksys AC2400 User Manual preview
AC2400
Brand: Linksys Pages: 544
Linksys Instant Wireless Series WAP54G User Manual preview
Instant Wireless Series WAP54G
Brand: Linksys Pages: 7
Pioneer CS374U-APP User Manual preview
CS374U-APP
Brand: Pioneer Pages: 12
P2 MOBILE TECHNOLOGIES LIMITED X20 Quick Start Manual preview
X20
Brand: P2 MOBILE TECHNOLOGIES LIMITED Pages: 5
Wireless interactive RedFire 200e User Manual preview
RedFire 200e
Brand: Wireless interactive Pages: 58
Quectel EM05-G Hardware Design preview
EM05-G
Brand: Quectel Pages: 73
Ebyte E220-230T30S User Manual preview
E220-230T30S
Brand: Ebyte Pages: 24
Delta ARCHER-C9 User Manual preview
ARCHER-C9
Brand: Delta Pages: 5
Planex BRC-14VG User Manual preview
BRC-14VG
Brand: Planex Pages: 305
Zalip CDW531AM User Manual preview
CDW531AM
Brand: Zalip Pages: 64

Brands by name

Popular brands

Load more brands