manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

The Motorola WiNG 5.7.1 System Reference Manual is a comprehensive guide providing detailed instructions on operating and configuring the Motorola WiNG 5.7.1 system. Discover all the necessary information in this manual, available for free download at 88.208.23.73:8080, ensuring a seamless user experience for your Motorola WiNG 5.7.1 product.

Share
Download
background image

5 - 119

5.2.6.15 Alias

Profile Network Configuration

With large deployments, the configuration of remote sites utilizes a set of shared attributes, of which a small set of attributes 
are unique for each location. For such deployments, maintaining separate configuration (WLANs, profiles, policies and ACLs) 
for each remote site is complex. Migrating any global change to a particular configuration item to all the remote sites is a 
complex and time consuming operation.

Also, this practice does not scale gracefully for quick growing deployments.

An 

alias

 enables an administrator to define a configuration item, such as a hostname, as an 

alias

 once and use the defined 

alias

 across different configuration items such as multiple ACLs. 

Once a configuration item, such as an ACL, is utilized across remote locations, the 

alias

 used in the configuration item (ACL) is 

modified to meet local deployment requirement. Any other ACL or other configuration items using the modified alias also get 
modified, simplifying maintenance at the remote deployment.

Aliases have scope depending on where the Alias is defined. Alias are defined with the following scopes:

•

Global aliases

 are defined from the 

Configuration > Network > Alias

 screen. Global aliases are available for use globally 

across all devices, profiles and RF Domains in the system.

•

Profiles aliases

 are defined from 

Configuration > Devices > System Profile > Network > Alias

 screen. These aliases 

are available for use to a specific group of wireless controllers or access points. 

Alias 

values defined in this profile override 

alias values defined within global aliases.

•

RF Domain aliases

 are defined from 

Configuration > Devices > RF Domain > Alias

 screen. These aliases are available 

for use for a site as a RF Domain is site specific. RF Domain alias values override alias values defined in a global alias or a 
profile alias configuration.

•

Device aliases

 are defined from 

Configuration > Devices > Device Overrides > Network > Alias

 screen. Device alias 

are utilized by a single device only. Device alias values override alias values defined in a global alias

, 

profiles alias or

 

RF 

Domain alias configuration.

Using an alias, configuration changes made at a remote location override any updates at the management center. For example, 
if an 

Network Alias

 defines a network range as 192.168.10.0/24 for the entire network, and at a remote deployment location, 

the local network range is 172.16.10.0/24, the 

Network Alias

 can be overridden at the deployment location to suit the local 

requirement. For the remote deployment location, the 

Network Alias

 works with the 172.16.10.0/24 network. Existing ACLs 

using this 

Network Alias

 need not be modified and will work with the local network for the deployment location. This simplifies 

ACL definition and management while taking care of specific local deployment requirements.

Alias can be classified as:

•

Network Basic Alias

•

Network Group Alias

•

Network Service Alias

5.2.6.15.1Network Basic Alias

Alias

A

 

basic alias

 is a set of configurations that consist of VLAN, host, network and address range alias configurations. VLAN 

configuration is a configuration for optimal VLAN re-use and management for local and remote deployments. A host alias 
configuration is for a particular host device’s IP address. A network alias configuration is utilized for an IP address on a 
particular network. An address range alias is a configuration for a range of IP addresses.

A basic alias configuration can contain multiple instances for each of the five (5) alias types.

To edit or delete a basic alias configuration:

1. Select 

Configuration

 tab from the Web user interface.

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.7.1

3Com OfficeConnect Datasheet preview
OfficeConnect
Brand: 3Com Pages: 6
Enterasys WS-AP3705i Installation Manual preview
WS-AP3705i
Brand: Enterasys Pages: 36
Symbol Spectrum24 AP-41X1-1050 HR Quick Reference Manual preview
Spectrum24 AP-41X1-1050 HR
Brand: Symbol Pages: 2
BEC MX-200A ODU Quick Start Manual preview
MX-200A ODU
Brand: BEC Pages: 18
Xsense Connectivity WSR-5000 User Manual preview
WSR-5000
Brand: Xsense Connectivity Pages: 56
MachPower WL-CPE5G24-059 User Manual preview
WL-CPE5G24-059
Brand: MachPower Pages: 26
H3C WA2610E-AGN Installation Manual preview
WA2610E-AGN
Brand: H3C Pages: 32
Steca TK-RW2 Installation And Operating Instructions Manual preview
TK-RW2
Brand: Steca Pages: 64
Z-Com XG-1020 User Manual preview
XG-1020
Brand: Z-Com Pages: 38
TUYA TYLC4 User Manual preview
TYLC4
Brand: TUYA Pages: 13
Abocom 80211GSDIO Quick Install Manual preview
80211GSDIO
Brand: Abocom Pages: 12
Rosewill RNX-N360RT Quick Installation Manual preview
RNX-N360RT
Brand: Rosewill Pages: 8
Billion BIPAC 6500W User Manual preview
BIPAC 6500W
Brand: Billion Pages: 61
IPmitter IPMIT100 Manual preview
IPMIT100
Brand: IPmitter Pages: 32
AirMobi iTravel3 Quick Installation Manual preview
iTravel3
Brand: AirMobi Pages: 12
AirMobi iPlay User Manual preview
iPlay
Brand: AirMobi Pages: 61
iBox ILRHMF960 Installation Manual preview
ILRHMF960
Brand: iBox Pages: 9
UAT WL-3111 User Manual preview
WL-3111
Brand: UAT Pages: 24

Brands by name

Popular brands

Load more brands